We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green SODIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2×16GB) DDR4 2400 CL17 260-PIN SODIMM for POSIFLEX RT-6115

SKU CH-7RTP-GP978

A 32 GB DDR4 SODIMM kit with two 16 GB modules running at 2400 MHz CL17 for the POSIFLEX RT-6115 terminal

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit expands POSIFLEX RT-6115 memory capacity
  • Dual 16 GB modules enable dual-channel DDR4 throughput
  • 2400 MHz CL17 timing balances speed and stability
  • 2 V DDR4 voltage reduces power draw in terminal
  • 260-pin SODIMM form factor fits POSIFLEX RT-6115 slot

POSIFLEX RT-6115 Memory Kit

This 32GB kit contains two 16GB DDR4 SODIMM modules built for the POSIFLEX RT-6115 terminal. Each module runs at 2400MHz with CL17 timing at 1.2V. The unbuffered, non-ECC design matches the system's original specification.

Retail and Kiosk Upgrades

Suits technicians upgrading POSIFLEX RT-6115 units in retail or kiosk deployments needing maximum supported capacity. Not for desktop PCs or laptops that require different pin counts, voltages, or registered memory. Buyers needing ECC error correction should look elsewhere.

Tool-Free Module Swap

Installation involves opening the terminal's memory bay and pressing both SODIMMs into the 260-pin slots until they click. Most issues arise when a single module is installed instead of the matched pair, or when the terminal's BIOS is not updated to recognise the full 32GB capacity.

Highlights

  • 32 GB kit expands POSIFLEX RT-6115 memory capacity
  • Dual 16 GB modules enable dual-channel DDR4 throughput
  • 2400 MHz CL17 timing balances speed and stability
  • 2 V DDR4 voltage reduces power draw in terminal
  • 260-pin SODIMM form factor fits POSIFLEX RT-6115 slot

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

Does the POSIFLEX RT-6115 need any other hardware for this 32GB DDR4 2400 kit to work?

The terminal must accept 260-pin DDR4 SODIMM modules running at 1.20V with CL17 timing and a 2Rx8 rank structure.

Will this 2×16GB kit run alongside any existing DDR4 2400 modules I keep in the RT-6115?

Yes, if the installed modules are also 1.20V non-ECC unbuffered SODIMMs with matching CL17 latency and 2Rx8 organisation.

How can I confirm the kit is running at the rated 2400 MT/s after installation?

Check the system BIOS or a tool such as CPU-Z; the memory tab should show DDR4-2400 (PC4-19200) at CL17 with both 16GB modules detected.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.