NEMIX RAM
NEMIX RAM 32GB (1x32GB) DDR4 3200 CL22 1.2V 288-Pin UDIMM Dell Compatible memory upgrade
A 32 GB DDR4-3200 UDIMM module with CL22 timing and 1.2 V operation for Dell systems
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity in a single 288-pin module
- DDR4 3200 speed rated at PC4-25600 bandwidth
- CL22 latency at 1.2 V standard voltage
- 2Rx8 dual-rank organisation for density
- Dell compatible UDIMM validated for server and workstation use
Dell-Compatible DDR4 UDIMM for Workstation Upgrades
This 32 GB single module uses DDR4 3200 memory rated at PC4-25600 with CL22 latency and 1.2 V operation. The 288-pin unbuffered non-ECC design targets Dell desktops and workstations that accept standard UDIMM slots. It serves IT teams and power users who need a direct replacement matched to Dell part SNPC5N22C/16G without additional configuration.
Sustained Load Stability Through OEM-Grade Testing
Modules are stress-tested under continuous load using major OEM chips from Samsung, Micron or Hynix to verify reliability in long-running workloads. The 2Rx8 organisation and 1.20 V rating keep power draw consistent during extended compute sessions, reducing the chance of throttling or errors when the system runs at capacity for hours.
Plain Green PCB Fits Dense Dell Chassis
No heat spreader is fitted, so the low-profile PCB clears tight DIMM spacing in compact Dell towers and rackmount workstations. The standard 288-pin keying ensures correct orientation on first insert, and the unbuffered design means no extra register delay for everyday office, virtualization or database tasks. Builders who need registered ECC modules or RGB lighting should look elsewhere.
Highlights
- 32 GB capacity in a single 288-pin module
- DDR4 3200 speed rated at PC4-25600 bandwidth
- CL22 latency at 1.2 V standard voltage
- 2Rx8 dual-rank organisation for density
- Dell compatible UDIMM validated for server and workstation use
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-328K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM |
Questions about this item
Does the 1.2V CL22 DDR4-3200 module run quietly and stay cool during continuous operation?
The stick operates at the standard 1.20V with no heat spreader, so it relies on case airflow; power draw is low and there are no moving parts to generate noise.
What must my Dell system already provide for this 288-pin UDIMM to work?
Your Dell desktop or workstation needs a free DDR4 UDIMM slot, support for 3200 MT/s (PC4-25600) non-ECC unbuffered memory, and a memory controller that accepts 2Rx8 organisation.
Will the 32GB 2Rx8 CL22 kit run alongside the original Dell SNPC5N22C/16G modules without manual timing changes?
The module matches the Dell part’s 3200 MT/s speed, 1.20V voltage, CL22 latency and 2Rx8 rank, so the BIOS should configure both sets automatically at the same JEDEC profile.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



