We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR4 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 256GB (8x32GB) DDR4 2933MHz ECC RDIMM CL21 1.2V 2Rx4 288-pin server memory upgrade

SKU CH-JSPN-XV478

Eight-module DDR4 ECC registered kit delivering 256 GB at 2933 MHz CL21 1.2 V for ASRock Rack ROMED8-2T EPYC servers

  • Capacity256GB (8 x 32GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 256GB 8X32GB

  • 256 GB total capacity across eight 32 GB modules
  • DDR4 2933 MHz speed rated at PC4-23400
  • ECC registered RDIMM design for server data integrity
  • 20 V operating voltage with CL21 latency
  • Validated for ASRock Rack ROMED8-2T EPYC motherboard

256GB DDR4 ECC RDIMM kit for ASRock EPYC servers

This 256GB kit contains eight 32GB registered DDR4 modules built for ASRock Rack ROMED8-2T motherboards with AMD EPYC processors. It targets administrators who need maximum registered ECC capacity in a single validated package.

Registered DDR4 2933 tops out at CL21 latency

The DDR4 2933 standard used here reaches its practical ceiling at CAS latency 21 with 1.20V supply. Registered buffering adds one cycle of address-command delay, so throughput scales with channel count rather than lower latency.

Eight-module 2Rx4 population fills every slot

The kit provides exactly eight dual-rank x4 modules to populate all DIMM slots on the compatible ASRock Rack ROMED8-2T platform. Systems with fewer slots or different rank-width requirements cannot use this configuration.

Highlights

  • 256 GB total capacity across eight 32 GB modules
  • DDR4 2933 MHz speed rated at PC4-23400
  • ECC registered RDIMM design for server data integrity
  • 20 V operating voltage with CL21 latency
  • Validated for ASRock Rack ROMED8-2T EPYC motherboard

Specifications

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-324K8
Capacity256GB (8 x 32GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (8X32GB) DDR4 2933MHZ PC4-23400 2Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the 8x32GB kit or a different capacity for my ASRock EPYC board?

The 256GB kit provides eight 32GB modules filling all slots on compatible ASRock EPYC motherboards for maximum density.

What does the 2933MHz rating mean once installed in the server?

The modules run at DDR4 2933 (PC4-23400) with CL21 latency delivering the rated throughput on supported EPYC platforms.

Does the 288-pin RDIMM interface limit anything in practice?

The 288-pin registered DDR4 form factor fits only DDR4 RDIMM slots and the registered buffer caps electrical load to one per channel.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.