NEMIX RAM 256GB (4x64GB) DDR4 2400 CL17 ECC LRDIMM 288-Pin memory upgrade
- 256GB (4 x 64GB)
- DDR4 2400 (PC4 1920…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
256 GB DDR4 server kit with four 64 GB ECC load-reduced DIMMs at 2933 MHz CL21, 1.2 V, 288-pin
Capacity 256GB 4X64GB
This kit provides 256GB of DDR4 2933 memory across four 64GB load-reduced DIMMs. It targets administrators upgrading ASRock Rack ROMED8-2T motherboards running AMD EPYC processors where registered ECC capacity is required.
Each module uses a 4Rx4 organisation with CL21 latency and operates at 1.20V. The load-reduced design reduces electrical load on the memory controller, allowing the full 256GB kit to populate all four slots without exceeding the platform's rank-per-channel limits.
Confirm the motherboard firmware supports 64GB LRDIMMs at 2933MT/s and review the vendor's memory population guide for correct slot order. The kit contains no heat spreaders, so chassis airflow must meet the server's thermal specification for high-density memory configurations.
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Server Motherboard Compatible Series Memory |
| Model | ASRock DDR4 2666MHZ ECC LRDIMM Load Reduced Server Memory |
| Part Number | ML23400-944K4 |
| Capacity | 256GB (4 x 64GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASRock |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 LRDIMM |
| Rank | 4Rx4 |
| Features | DDR4 ECC LRDIMM Load Reduced Server Motherboard Compatible |
| Package Content | 256GB (4X64GB) DDR4 2933MHZ PC4-23400 4Rx4 1.2V CL21 288-PIN ECC LRDIMM Load Reduced Server Memory KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit is built from major-brand DRAM and tested under load for the ASRock ROMED8-2T; no extra firmware steps are required beyond normal BIOS memory training.
The 1.20 V operating voltage and 288-pin DDR4 LRDIMM electrical spec define the sustained envelope; the memory controller on the EPYC platform will throttle before the modules exceed their rated speed.
With no heat spreader and a 1.2 V load-reduced design, the modules rely on chassis airflow; typical server fan curves keep them within normal DDR4 thermal limits without adding audible noise.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?