NEMIX RAM
NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 1.1V UDIMM for ASUS ProArt Z890-CREATOR WiFi memory upgrade
A 192GB kit of four 48GB DDR5 modules at 5600MHz with CL46 latency and 1.1V operation, built for the ASUS ProArt Z890-CREATOR WiFi motherboard
- Capacity192GB (4 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 192 GB capacity for heavy multitasking and large datasets
- DDR5 5600 speed for high data throughput
- CL46 latency for responsive memory access
- 1 V operation reduces power draw and heat
- Four 48 GB modules in a matched kit for quad-channel bandwidth
192 GB DDR5 kit for ASUS ProArt Z890-CREATOR WiFi
This NEMIX RAM kit supplies 192 GB across four 48 GB DDR5 5600 CL46 UDIMMs. It runs at 1.1 V and uses 2Rx8 unbuffered non-ECC chips. The modules are built for the ASUS ProArt Z890-CREATOR WiFi motherboard.
Suited for memory-heavy workstations.
Content creators and engineers who need maximum capacity on this board will benefit from the 192 GB total. Builders who require ECC error correction or registered modules should look at a different memory type.
DDR5 5600 CL46 at 1.1 V decides fit
The kit operates at DDR5 5600 with CAS latency 46 and 1.1 V on 288-pin UDIMM sockets. Verify that the motherboard firmware supports this speed and timing before purchase.
Highlights
- 192 GB capacity for heavy multitasking and large datasets
- DDR5 5600 speed for high data throughput
- CL46 latency for responsive memory access
- 1 V operation reduces power draw and heat
- Four 48 GB modules in a matched kit for quad-channel bandwidth
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 192GB (4 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
How do I install the 4 x 48 GB DDR5 5600 UDIMM kit on the ASUS ProArt Z890-CREATOR WiFi and which step is often missed?
Align each 288-pin module with the slot key, press down firmly until both retention clips click, then enter the BIOS to enable the 5600 MT/s XMP profile — many builders forget the profile step and run at default speed.
What maintenance or replacement will the 192 GB DDR5 kit need over its lifetime?
No scheduled maintenance is required; the modules have no heat spreader, so keep case airflow clean, and if a 48 GB stick ever fails the lifetime replacement warranty covers it.
What limit appears first when the 2Rx8 CL46 1.10 V DDR5 5600 kit runs sustained heavy workloads?
The CL46 latency at 5600 MT/s is the primary bottleneck; sustained throughput caps at the rated PC5-44800 bandwidth before thermal throttling becomes a factor.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



