NEMIX RAM
NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM for ASUS ProArt Z790-CREATOR WiFi memory upgrade
A 192GB DDR5 kit of four 48GB UDIMMs at 5600MHz CL46 1.1V for the ASUS ProArt Z790-CREATOR WiFi motherboard
- Capacity192GB (4 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 192 GB total capacity across four 48 GB modules for heavy workloads
- DDR5 5600 speed with CL46 latency keeps data flowing smoothly
- Low 1.1 V operation reduces power draw and heat
- 2Rx8 dual-rank design boosts memory density and throughput
- Validated for ASUS ProArt Z790-CREATOR WiFi motherboard compatibility
192 GB DDR5 kit for ASUS ProArt Z790-CREATOR WiFi
This NEMIX RAM kit delivers 192 GB across four 48 GB DDR5 UDIMMs rated at 5600 MT/s with CL46 latency and 1.1 V operation. It targets content creators and workstation users who need maximum capacity on the ASUS ProArt Z790-CREATOR WiFi platform.
Install four UDIMMs and enable XMP in BIOS
Each module is a 288-pin unbuffered non-ECC DIMM with no heat spreader, so clearance is minimal. The main risk is populating all four slots on a consumer board, which can prevent the memory from training at the rated 5600 speed unless the BIOS is current and the XMP profile is applied.
Verify board revision and BIOS before ordering
The kit is validated for the ASUS ProArt Z790-CREATOR WiFi motherboard only; other Z790 models or earlier chipsets are not covered. Builders who need ECC, registered modules or speeds above 5600 MT/s should look elsewhere.
Highlights
- 192 GB total capacity across four 48 GB modules for heavy workloads
- DDR5 5600 speed with CL46 latency keeps data flowing smoothly
- Low 1.1 V operation reduces power draw and heat
- 2Rx8 dual-rank design boosts memory density and throughput
- Validated for ASUS ProArt Z790-CREATOR WiFi motherboard compatibility
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 192GB (4 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
How can I verify the kit is running at DDR5 5600 with CL46 after installing it in the ASUS ProArt Z790-CREATOR WiFi?
Enter the UEFI or use a tool such as CPU-Z and confirm the memory frequency shows 5600 MT/s and the CAS latency reads 46.
What modules are included and is any extra hardware required for installation?
The box contains four 48 GB DDR5 UDIMM modules for a total of 192 GB; no additional parts are needed — just insert them into the motherboard slots.
Should I choose this 192 GB kit or a smaller capacity for the ASUS ProArt Z790-CREATOR WiFi?
Select the 192 GB (4 × 48 GB) kit when your workloads need the full capacity; otherwise a smaller kit of the same DDR5 5600 CL46 specification will also be compatible.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



