We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board memory stick with gold edge connector and black chips

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 1.1V 288-pin UDIMM ASRock Z790 PG Riptide memory upgrade

SKU CH-8P99-5CA85

16 GB DDR5 4800 CL40 1.1 V 288-pin UDIMM built for ASRock Z790 PG Riptide motherboards

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 4800 MHz capacity boosts multitasking headroom
  • CL40 latency at 1.1 V keeps power draw low
  • 1Rx8 single-rank layout simplifies compatibility tuning
  • 288-pin UDIMM form factor fits standard desktop slots
  • Validated for ASRock Z790 PG Riptide motherboard

Compatible DDR5 upgrade for ASRock Z790 PG Riptide

This 16 GB DDR5 4800 module is validated for the ASRock Z790 PG Riptide motherboard. It runs at 1.10 V with CL40 latency in a single 1Rx8 rank. The unbuffered non-ECC UDIMM uses major OEM chips from Samsung Micron or Hynix. No heat spreader is fitted.

Builders matching this exact board and spec

Suits owners of the ASRock Z790 PG Riptide who need a 16 GB DDR5 4800 CL40 1.10 V UDIMM. Not suited for systems requiring ECC error correction registered modules or a different voltage. Buyers with other motherboards should verify their qualified vendor list before purchasing.

DDR5 4800 CL40 at 1.10 V

The decisive specification is the DDR5 4800 speed rated at CL40 with 1.10 V operation in a 288-pin UDIMM form factor. If your platform demands this exact speed latency and voltage combination this module fits. If the board requires a different data rate timing or voltage choose another part.

Highlights

  • 16 GB DDR5 4800 MHz capacity boosts multitasking headroom
  • CL40 latency at 1.1 V keeps power draw low
  • 1Rx8 single-rank layout simplifies compatibility tuning
  • 288-pin UDIMM form factor fits standard desktop slots
  • Validated for ASRock Z790 PG Riptide motherboard

Specifications

BrandNEMIX RAM
SeriesASRock Gaming Motherboard Compatible Series Memory
ModelASRock DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASRock
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Does the module ship alone or as a kit with extra parts?

The package contains a single 16GB DDR5 4800 UDIMM rated CL40 at 1.1V; no additional components are included.

Should I pick a different speed or latency for the ASRock Z790 PG Riptide?

This 4800MHz CL40 module matches the board's native DDR5 speed and is validated for that platform; higher speeds would require manual tuning.

Will the 4800MHz rating run at that speed automatically on the Z790 PG Riptide?

Yes, the board's default DDR5 profile sets 4800MHz CL40 at 1.1V, so the module operates at its rated frequency without BIOS changes.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.