NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX EK-2430 memory upgrade
A 16 GB DDR4 3200 SODIMM module with CL22 latency, 2Rx8 organisation and 1.2 V operation, built for POSIFLEX EK-2430 Mercury Series kiosks
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB DDR4 3200 memory boosts POSIFLEX EK-2430 kiosk speed
- CL22 1.20V timing keeps system stable under load
- 2Rx8 260-pin SODIMM fits Mercury Series slot exactly
- Major OEM Samsung Micron Hynix chips ensure reliable operation
- Non-ECC unbuffered design matches factory specification precisely
POSIFLEX EK-2430 DDR4 SODIMM upgrade
This 16 GB DDR4 3200 module is built for the POSIFLEX EK-2430 Mercury Series kiosk. It uses a 260-pin SODIMM form factor with 2Rx8 organisation and runs at 1.2 V. The stick is non-ECC, unbuffered and carries a CL22 latency rating. It targets technicians who need a direct memory replacement for that specific point-of-sale platform.
Compatibility check before ordering
Verify that the target kiosk is the POSIFLEX EK-2430 Mercury Series and that its board accepts DDR4 3200 SODIMMs at 1.2 V. Confirm the slot count and maximum supported capacity per slot in the system manual. Ensure the BIOS is up to date and that the chassis can be opened for SODIMM access without voiding any service agreement. The module is not ECC and not registered, so the platform must support unbuffered memory.
Thermals noise and power draw
The module operates at the standard DDR4 voltage of 1.2 V and has no heat spreader, relying on chassis airflow for cooling. With no moving parts it produces no audible noise during operation. Power consumption stays within the normal range for a single 16 GB DDR4 SODIMM at this speed and latency. Typical workloads in a kiosk environment will not push the stick beyond its rated thermal envelope.
Highlights
- 16GB DDR4 3200 memory boosts POSIFLEX EK-2430 kiosk speed
- CL22 1.20V timing keeps system stable under load
- 2Rx8 260-pin SODIMM fits Mercury Series slot exactly
- Major OEM Samsung Micron Hynix chips ensure reliable operation
- Non-ECC unbuffered design matches factory specification precisely
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Questions about this item
Does the package include anything besides the single 16 GB SODIMM module?
The box contains only the 16 GB DDR4 3200 CL22 260-pin SODIMM; no tools, cables or extra brackets are supplied.
Is the 16 GB CL22 2Rx8 stick the only capacity and latency option for the POSIFLEX EK-2430?
This listing offers the 16 GB CL22 2Rx8 configuration; other capacities or timings would be separate part numbers.
Will the 3200 MT/s rating run at full speed inside the EK-2430 kiosk?
The module is rated DDR4 3200 (PC4-25600) at 1.2 V; actual speed depends on the system's memory controller and BIOS settings.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
$174.99
0.00210236BTC
In stock
minisforum
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
$6.99
0.00008398BTC
In stock