NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM Kingston KVR32S22D8/16 memory upgrade
16 GB DDR4 3200 SODIMM for Kingston systems, CL22 2Rx8 unbuffered at 1.2 V
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB DDR4 3200MHz boosts system responsiveness
- CL22 latency with 1.2V operation balances speed and efficiency
- 2Rx8 dual-rank design improves memory bandwidth
- 260-pin SODIMM fits compatible Kingston laptops and AIOs
- Major OEM chips ensure tested reliability
Compatible laptop upgrade
This 16GB DDR4 SODIMM is built to match Kingston KVR32S22D8/16 specifications for laptops and all-in-one PCs. It installs in a standard 260-pin slot and uses major OEM chips from Samsung, Micron or Hynix. The module is unbuffered and non-ECC, so it works in consumer platforms that accept PC4-25600 memory.
Cool and efficient operation
Running at 1.20V, the stick draws little power and produces minimal heat without a spreader. CL22 latency at 3200MHz keeps timings relaxed for stable everyday use. The low-voltage design helps maintain quiet thermals inside thin chassis where airflow is limited.
Steady throughput under load
Rigorous stress testing under load verifies reliability for sustained workloads such as virtualisation, large datasets or AI inference tasks. Dual-rank 2Rx8 organisation supports consistent bandwidth during extended sessions. The lifetime replacement warranty reflects confidence in long-term stability.
Highlights
- 16GB DDR4 3200MHz boosts system responsiveness
- CL22 latency with 1.2V operation balances speed and efficiency
- 2Rx8 dual-rank design improves memory bandwidth
- 260-pin SODIMM fits compatible Kingston laptops and AIOs
- Major OEM chips ensure tested reliability
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | Kingston Laptop, AIO All-in-One PC Compatible Series Memory |
| Model | Kingston DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Kingston |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Questions about this item
How do I install the 260-pin SODIMM in my laptop, and which step do people often miss?
Power off the laptop, unplug it, and remove the battery if possible. Open the memory slot cover, align the notch on the 260-pin module with the slot key, insert at an angle, then press down until both side clips click. The step often missed is verifying both clips are fully locked before reassembling.
What maintenance or replacement will this 16GB DDR4 module need later?
No routine maintenance is required. Keep the laptop vents clear of dust to maintain airflow around the module. If a memory error appears in diagnostics or the system becomes unstable under load, replace the module; otherwise it runs for the life of the device.
What limit appears first when this CL22 3200MHz kit runs sustained workloads?
The CAS latency of 22 cycles at 3200MHz sets the response-time floor. Under continuous heavy load the memory controller will hit that latency bound before bandwidth or voltage (1.20V) becomes the bottleneck.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



