NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 1.2V 288-Pin UDIMM Hynix HMA82GU6CJR8NXN HMA82GU6DJR8NXN memory upgrade
A 16 GB DDR4 3200 UDIMM with CL22 latency and 1.2 V operation for compatible Hynix systems
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 UDIMM for fast desktop upgrades
- CL22 latency at 1.20 V keeps power draw low
- 2Rx8 dual-rank layout boosts memory bandwidth
- 288-pin unbuffered design fits standard motherboard slots
- Built with major OEM Hynix chips for reliable compatibility
16 GB DDR4 3200 UDIMM for Hynix systems
This 16 GB DDR4 module runs at 3200 MHz with CL22 latency and 1.20 V. It is built as a 2Rx8 unbuffered non-ECC UDIMM for desktop PCs and workstations that use Hynix-compatible memory. The single stick upgrades one slot without requiring registered or ECC support.
288-pin unbuffered design with no heat spreader
The bare 288-pin PCB fits standard DDR4 DIMM sockets and keeps a low profile for tight clearance around large CPU coolers. Unbuffered operation means the memory controller talks directly to the chips, so the board must support non-ECC unbuffered UDIMMs. No heat spreader is included, so airflow over the modules is relied on for cooling.
Verify DDR4 3200 support and single-rank limits
Check that the motherboard or system lists DDR4 3200 (PC4-25600) and accepts 2Rx8 non-ECC unbuffered UDIMMs. Some platforms cap rank count per channel or require specific population rules for dual-channel operation. Confirm the slot count and maximum capacity per slot before ordering.
Highlights
- 16 GB DDR4 3200 UDIMM for fast desktop upgrades
- CL22 latency at 1.20 V keeps power draw low
- 2Rx8 dual-rank layout boosts memory bandwidth
- 288-pin unbuffered design fits standard motherboard slots
- Built with major OEM Hynix chips for reliable compatibility
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Server/Workstaion Compatible Series Memory |
| Model | Hynix DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Hynix |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM |
Questions about this item
What DDR4 speed and peak transfer rate does this module run at?
It operates at DDR4 3200 with a PC4-25600 peak transfer rate.
What physical slot and pin count does this UDIMM require?
It fits a standard 288-pin DDR4 UDIMM slot on a desktop motherboard.
How is this stick installed and what common step is missed?
Align the notch with the slot key, press firmly until both side clips click, then verify the BIOS reports 3200 MT/s and CL22 timing.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
$174.99
0.00208619BTC
In stock
minisforum
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
$6.99
0.00008333BTC
In stock