NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 1.2V 288-Pin UDIMM ASRock B550M-HDV memory upgrade
A 16 GB DDR4 3200 UDIMM rated CL22 at 1.2 V, built with major OEM chips and validated for the ASRock B550M-HDV motherboard
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 boosts desktop responsiveness
- CL22 CAS latency delivers stable timing at speed
- 2 V operation keeps power draw low
- 2Rx8 dual-rank layout increases memory density
- 288-pin UDIMM fits ASRock B550M-HDV motherboard
16 GB DDR4 3200 UDIMM for ASRock B550M-HDV
This NEMIX RAM module provides 16 GB of DDR4 memory rated at 3200 MT/s with CL22 latency. It uses a standard 288-pin unbuffered non-ECC design and operates at 1.2 V. The kit is built specifically for compatibility with the ASRock B550M-HDV motherboard.
Suits builders upgrading that specific board
The single 16 GB stick fits users who want a straightforward capacity increase on the ASRock B550M-HDV platform without mixing modules. It is not for systems that require ECC error correction, registered buffering, lower latency timings, or memory speeds beyond 3200 MT/s.
2Rx8 dual-rank organisation
The module uses a 2Rx8 configuration, meaning it has two ranks of eight-bit wide chips. This rank structure affects how the memory controller addresses the DIMM and can influence stability on boards with limited rank support per channel. Verify that your ASRock B550M-HDV firmware accepts dual-rank UDIMMs at the target speed.
Highlights
- 16 GB DDR4 3200 boosts desktop responsiveness
- CL22 CAS latency delivers stable timing at speed
- 2 V operation keeps power draw low
- 2Rx8 dual-rank layout increases memory density
- 288-pin UDIMM fits ASRock B550M-HDV motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASRock |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM |
Questions about this item
How much power does the 1.2 V DDR4 module draw when the system runs all day?
The module operates at a standard 1.2 V DDR4 voltage, keeping power draw low during continuous use.
What motherboard slot and chipset must I already have for this 288-pin UDIMM to work?
It requires a desktop board with a DDR4 288-pin UDIMM slot; the kit is validated for the ASRock B550M-HDV.
Will this CL22 3200 MT/s stick run stably alongside my existing slower DDR4 modules?
The memory will down-clock to match the slowest installed module, so it works with older DDR4 at the lower common speed.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
$174.99
0.00208344BTC
In stock
minisforum
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
$6.99
0.00008322BTC
In stock