We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR4 UDIMM memory module

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 1.2V 2Rx8 288-Pin UDIMM ASRock B660M memory upgrade

SKU CH-A6MK-18S3G

16GB DDR4 3200 CL22 1.2V 2Rx8 288-Pin UDIMM for ASRock B660M motherboards

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4-3200 module boosts desktop responsiveness
  • CL22 latency at 1.2 V balances speed with efficiency
  • 2Rx8 dual-rank layout increases memory density per slot
  • 288-pin UDIMM fits ASRock B660M series motherboards
  • Tested with Samsung, Micron or Hynix chips for stability

16GB DDR4 module for ASRock B660M boards

This 288-pin UDIMM delivers 16GB of non-ECC unbuffered memory built specifically for ASRock B660M motherboards including PG Riptide Phantom Gaming 4 Pro RS and ProRS models. It installs in a single slot and operates at the standard 1.20V DDR4 voltage.

Runs at DDR4 3200 with CL22 latency

The module is rated PC4-25600 at 3200MT/s with a CAS latency of 22 cycles. Its 2Rx8 rank organisation and Samsung Micron or Hynix chips are validated for stability on the target platform.

Fits a single DIMM slot on compatible boards

The stick requires an open 288-pin DDR4 slot and a motherboard that supports unbuffered non-ECC UDIMMs at 1.20V. It leaves remaining slots free for additional capacity and does not need a heat spreader or extra clearance.

Highlights

  • 16 GB DDR4-3200 module boosts desktop responsiveness
  • CL22 latency at 1.2 V balances speed with efficiency
  • 2Rx8 dual-rank layout increases memory density per slot
  • 288-pin UDIMM fits ASRock B660M series motherboards
  • Tested with Samsung, Micron or Hynix chips for stability

Specifications

BrandNEMIX RAM
SeriesASRock Gaming Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

What does the 3200 MT/s rating mean once the module is installed in an ASRock B660M board?

The board will run the stick at DDR4 3200 with CL22 timings at 1.2 V, delivering PC4-25600 bandwidth without manual tuning.

How does the DDR4 UDIMM interface limit the usable speed on this platform?

The 288-pin unbuffered DDR4 slot caps transfer rate at 3200 MT/s, so the module operates at its rated ceiling without overclocking.

Will the 288-pin stick fit the four DIMM slots on my B660M Pro RS?

Yes, the standard 288-pin UDIMM form factor matches the four DDR4 slots on all listed ASRock B660M models.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.