We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR4 UDIMM module with black chips and gold contacts no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 1.2V 288-Pin UDIMM Supermicro MEM-DR416LD-UN32 desktop RAM

SKU CH-79Z9-BXYHK

16 GB DDR4 3200 CL22 1.2 V 288-pin UDIMM desktop memory for Supermicro MEM-DR416LD-UN32 compatible systems

  • Capacity16GB
  • Type288-pin DDR4 UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo
  • 16 GB DDR4 3200 boosts desktop responsiveness
  • CL22 latency at 1.2 V keeps power draw low
  • 288-pin UDIMM fits standard desktop DIMM slots
  • Dual-rank 2Rx8 organisation increases memory density
  • Built with Samsung, Micron or Hynix chips for reliability

16 GB DDR4 3200 UDIMM for desktop upgrades

This 16 GB DDR4 module runs at 3200 MHz with CL22 latency and 1.20 V operation. It is built as a 288-pin unbuffered non-ECC UDIMM using major OEM chips from Samsung Micron or Hynix. The stick targets desktop PCs and workstations that accept standard DDR4 memory.

No heat spreader means low profile fits tight slots

The bare circuit board has no heat spreader so it sits flush in crowded motherboards or small form factor cases. Standard 288-pin DDR4 keying ensures it seats in any desktop DDR4 slot without adapters. Unbuffered design keeps latency low for typical client workloads.

Verify motherboard supports DDR4 3200 non-ECC

Check that your board lists DDR4 3200 PC4-25600 non-ECC unbuffered UDIMMs in its qualified vendor list. Confirm the CPU memory controller can handle 3200 MT/s at 1.20 V without manual voltage changes. Ensure an empty 288-pin slot is available for the single 16 GB module.

Highlights

  • 16 GB DDR4 3200 boosts desktop responsiveness
  • CL22 latency at 1.2 V keeps power draw low
  • 288-pin UDIMM fits standard desktop DIMM slots
  • Dual-rank 2Rx8 organisation increases memory density
  • Built with Samsung, Micron or Hynix chips for reliability

Specifications

BrandNEMIX RAM
SeriesSupermicro MEM-DR416LD-UN32 Compatible Series memory
Part NumberMD25600-628K1
Capacity16GB
Type288-pin DDR4 UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Questions about this item

What speed does the DDR4 3200 interface cap at in practice?

The DDR4 3200 interface runs at up to 3200 MT/s, delivering PC4-25600 bandwidth when the motherboard supports that data rate.

What physical slot and clearance does the 288-pin UDIMM need to fit?

It requires a standard 288-pin DDR4 UDIMM slot; the module has no heat spreader, so it fits under most CPU coolers without height issues.

How is the module installed, and what step do people often miss?

Align the notch with the slot key, press firmly until both retention clips click shut, then verify the BIOS reports 16 GB at 3200 MT/s.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.