We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 CL21 1.2V 288-Pin UDIMM Hynix HMA82GU6CJR8N-WM desktop RAM

SKU CH-PC0J-MAPGC

A 16 GB DDR4 UDIMM running at 2933 MHz with CL21 latency and 1.2 V operation

  • Capacity16GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity expands multitasking headroom
  • DDR4 2933 speed feeds data to the CPU faster
  • CL21 latency keeps response tight under load
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop motherboards

16GB DDR4 2933 UDIMM

This module provides 16GB of DDR4 memory at 2933 MT/s with CL21 latency and 1.20V operation. It uses a standard 288-pin unbuffered non-ECC design built with major OEM Hynix chips. The single-rank 2Rx8 configuration fits typical desktop motherboards.

Desktop upgrades not servers

Builders adding capacity to a consumer desktop or workstation will find the speed and voltage match common platform defaults. Systems requiring registered ECC modules or registered DIMMs for multi-socket servers should select a different part.

PC4-23400 speed rating

The decisive figure is the 2933 MT/s PC4-23400 data rate; if your board only supports lower JEDEC speeds the module will down-clock automatically. Verify that your motherboard accepts 2933 MT/s DDR4 UDIMMs before ordering.

Highlights

  • 16 GB capacity expands multitasking headroom
  • DDR4 2933 speed feeds data to the CPU faster
  • CL21 latency keeps response tight under load
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop motherboards

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD23400-628K1
Capacity16GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Questions about this item

Does this 288-pin DDR4 UDIMM fit a standard desktop motherboard slot?

Yes, the 288-pin DDR4 UDIMM form factor matches the standard desktop DIMM slot found on compatible motherboards.

What is the correct way to seat the module so the retention clips lock?

Align the notch on the module with the key in the slot, press down firmly until both side clips click into place.

Will the 1.20V operating voltage require any future adjustment or replacement?

No, the module runs at the standard 1.20V DDR4 voltage and has no heat spreader or moving parts that need servicing.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.