We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 CL19 1Rx8 1.2V UDIMM Supermicro MBD-C9Z390-CG memory upgrade

SKU CH-4VK8-GK2XE

A 16 GB DDR4 2666 CL19 UDIMM built for the Supermicro MBD-C9Z390-CG workstation board

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity expands system memory for demanding workloads
  • DDR4 2666 speed delivers responsive data throughput
  • CL19 latency supports stable operation under load
  • 2 V low voltage reduces power draw and heat
  • Validated for Supermicro MBD-C9Z390-CG motherboard compatibility

Compatible Supermicro Memory Upgrade

This 16GB DDR4 module is built for the Supermicro MBD-C9Z390-CG motherboard. It targets system builders and IT staff who need a validated memory upgrade for that specific platform.

Unbuffered UDIMM With Standard Pin Layout

The stick uses a 288-pin unbuffered design without a heat spreader, so it fits standard desktop DIMM slots and leaves clearance for large CPU coolers. Major OEM chips from Samsung, Micron or Hynix are used throughout.

Low-Voltage Operation At CL19

Running at 1.2V and DDR4 2666, the module draws minimal power and produces little heat during typical workloads. Passive cooling is sufficient because there is no spreader to trap warmth.

Highlights

  • 16 GB capacity expands system memory for demanding workloads
  • DDR4 2666 speed delivers responsive data throughput
  • CL19 latency supports stable operation under load
  • 2 V low voltage reduces power draw and heat
  • Validated for Supermicro MBD-C9Z390-CG motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR4 2666MHZ Non-ECC Unbuffered UDIMM
Part NumberMD21300-618K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

What DDR4 standard and peak transfer rate does this 2666 MHz module use?

This module runs at DDR4 2666 with a PC4-21300 rating, so the peak transfer rate is 21300 MB/s.

What physical slot and pin count does the UDIMM require?

It is a 288-pin DDR4 UDIMM that fits a standard desktop DIMM slot on the Supermicro MBD-C9Z390-CG motherboard.

How is the single 16 GB stick installed and what step is often missed?

Power off the system, open the case, align the notch on the 288-pin UDIMM with the slot key, press firmly until both retention clips click, then verify in BIOS that the memory is detected at 2666 MHz.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.