We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 CL17 1.2V 288-Pin UDIMM QNAP RAM-16GDR4A1-UD-2400 NAS desktop RAM

SKU CH-SF5K-FP1X6

16 GB DDR4 desktop UDIMM running at 2400 MHz with CL17 latency and 1.2 V operation

  • Capacity16GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo
  • 16GB DDR4 2400 MHz capacity accelerates NAS and desktop workloads
  • CL17 latency at 1.20V reduces power draw while maintaining responsiveness
  • 288-pin UDIMM form factor fits standard desktop and QNAP NAS slots
  • Unbuffered non-ECC design simplifies installation for quick memory upgrades
  • Major OEM Samsung Micron Hynix chips ensure reliable operation under load

16 GB DDR4 desktop module

This single 16 GB DDR4 UDIMM runs at 2400 MT/s with CL17 latency and 1.2 V operation. It is an unbuffered non-ECC stick built with major OEM DRAM chips for standard desktop and compatible NAS platforms.

Compatibility check before ordering

Verify that your motherboard or NAS accepts 288-pin DDR4 UDIMM modules at the PC4-19200 speed grade. Confirm the board supports non-ECC unbuffered memory and that a vacant slot is available for the 1x16 GB configuration.

Build quality and daily use

The module has no heat spreader, keeping the profile low for tight slots and allowing direct airflow over the chips. Gold-plated edge contacts on the 288-pin connector resist oxidation and ensure reliable seating through repeated upgrades.

Highlights

  • 16GB DDR4 2400 MHz capacity accelerates NAS and desktop workloads
  • CL17 latency at 1.20V reduces power draw while maintaining responsiveness
  • 288-pin UDIMM form factor fits standard desktop and QNAP NAS slots
  • Unbuffered non-ECC design simplifies installation for quick memory upgrades
  • Major OEM Samsung Micron Hynix chips ensure reliable operation under load

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD19200-628K1
Capacity16GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Questions about this item

Will this module fit my QNAP NAS that calls for the RAM-16GDR4A1-UD-2400 part?

Yes, the supplier title lists that exact QNAP part number as compatible, so the 288-pin UDIMM will seat correctly in the NAS memory slot.

Does my motherboard need to support ECC for this stick to work?

No, this is a non-ECC unbuffered module, so it works in standard desktop boards and the listed QNAP NAS without ECC support.

What do the 2400 and CL17 figures mean for everyday use?

2400 MT/s is the data rate and CL17 is the latency; together they set the module at the standard DDR4 2400 performance level for general desktop and NAS workloads.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.