NEMIX RAM
NEMIX RAM 16GB (4x4GB) DDR3 1600 PC3-12800 1.35V 204-Pin SODIMM Kit memory upgrade
Four-module kit provides 16 GB of DDR3 1600 SODIMM memory at 1.35 V for Apple iMac systems
- Capacity16GB (4 x 4GB)
- SpeedDDR3 1600 (PC3 12800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.35V
- 16 GB kit for smooth multitasking on compatible Apple systems
- DDR3 1600 speed with CL11 latency for responsive performance
- Low 1.35 V operation reduces power draw and heat
- 204-pin SODIMM form factor fits supported iMac and Mac Mini slots
- Four 4 GB modules enable dual-channel bandwidth for faster data access
Apple iMac SODIMM Kit
This 16 GB kit contains four 4 GB DDR3 1600 modules built for Apple iMac and Mac Mini systems. The 204-pin SODIMM form factor fits the memory slots in compatible all-in-one and compact desktops. It targets owners of those machines who need the maximum supported capacity in a matched set.
Low-Profile Unbuffered Modules
Each stick runs at 1.35 V without a heat spreader, keeping the profile thin enough for tight SODIMM sockets. The 2Rx8 organisation and CL11 latency are native to the PC3-12800 specification. Major OEM chips from Samsung, Micron or Hynix are used throughout the kit.
DDR3 1600 Non-ECC Specification
The memory operates at DDR3 1600 (PC3-12800) with non-ECC unbuffered signalling. Systems that require ECC, registered modules or a different DDR generation will not accept this kit. Verify that your Apple model specifies DDR3 1600 SODIMM before purchase.
Highlights
- 16 GB kit for smooth multitasking on compatible Apple systems
- DDR3 1600 speed with CL11 latency for responsive performance
- Low 1.35 V operation reduces power draw and heat
- 204-pin SODIMM form factor fits supported iMac and Mac Mini slots
- Four 4 GB modules enable dual-channel bandwidth for faster data access
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | Apple iMac/Mac Mini Compatible Series Memory |
| Model | Apple DDR3 1600MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS12800-428K4 |
| Capacity | 16GB (4 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.35V |
| Compatible System | Apple |
| CAS Latency | CL11 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (4X4GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Questions about this item
Does the DDR3 1600 PC3-12800 interface limit the kit to 1600 MT/s in an Apple iMac?
Yes, the DDR3 1600 PC3-12800 specification means the modules run at 1600 MT/s; the iMac memory controller will not push them beyond that speed.
What physical slot and notch position do the 204-pin SODIMM modules require?
Each 4 GB module uses a standard 204-pin DDR3 SODIMM edge connector with the key notch offset for DDR3; it fits the SO-DIMM slots in compatible iMac and Mac mini models.
How are the four sticks installed, and which step is most often missed?
Power down, open the memory door, eject any existing sticks, insert each 2Rx8 module at an angle until the gold contacts disappear, then press firmly until the side clips click; the step most often missed is pressing hard enough to engage both clips.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



