We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 SODIMM sticks with gold contacts and black chips

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 PC4-25600 CL22 2Rx8 1.2V 260-pin SODIMM POSIFLEX ZT-3715E memory upgrade

SKU CH-DZ87-R9AJY

A 16 GB DDR4 SODIMM kit for POSIFLEX ZT-3715E terminals, running at 3200 MT/s with CL22 latency

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 kit boosts POS terminal responsiveness
  • 3200MHz CL22 modules deliver stable data throughput
  • 2V operation reduces power draw and heat
  • 2Rx8 dual-rank design maximises memory density
  • Validated for POSIFLEX ZT-3715E Haydn ZT Series

POS terminal memory kit

This NEMIX RAM kit supplies 16GB of DDR4 3200 SODIMM memory in two 8GB modules built for the POSIFLEX ZT-3715E Haydn ZT series point-of-sale terminal. It runs at 1.20V with CL22 latency and uses unbuffered non-ECC 2Rx8 chips from major OEM suppliers.

Direct replacement for factory memory

The modules match the terminal’s 260-pin DDR4 SODIMM slot and PC4-25600 specification, so they install without configuration changes. The upgrade is worthwhile when the original capacity limits multitasking or when the system shows memory pressure during peak transaction loads.

Suits POS deployments needing more headroom

Technicians maintaining ZT-3715E terminals can use this kit to double the standard memory allowance. Buyers who need ECC protection, registered modules, or capacities beyond 16GB should look at server-class memory instead.

Highlights

  • 16GB DDR4 kit boosts POS terminal responsiveness
  • 3200MHz CL22 modules deliver stable data throughput
  • 2V operation reduces power draw and heat
  • 2Rx8 dual-rank design maximises memory density
  • Validated for POSIFLEX ZT-3715E Haydn ZT Series

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

Questions about this item

Will the 260-pin SODIMM modules fit the memory slots in the POSIFLEX ZT-3715E?

Yes, the kit uses the standard 260-pin DDR4 SODIMM form factor that matches the slots in the POSIFLEX ZT-3715E Haydn ZT Series terminal.

What is the correct way to seat the modules so they lock in place?

Align the notch on each module with the key in the slot, insert at a slight angle, then press down firmly until both side clips click and hold the module flat.

Will these CL22 1.2V modules need any firmware updates or replacement over time?

No firmware updates are required; the modules are validated for the POSIFLEX ZT-3715E and carry a lifetime replacement warranty from the manufacturer.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.