We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 288-Pin UDIMM Kit for ASUS TRX40 Zenith II Extreme

SKU CH-MHBS-0D9WW

16 GB dual-channel DDR4 kit at 3200 MHz with CL22 latency, 1.2 V, 288-pin UDIMM modules validated for ASUS TRX40 Zenith II Extreme

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Dual-channel 16 GB kit boosts multitasking headroom
  • DDR4 3200 MT/s speed matches motherboard spec
  • Low 1.2 V operation keeps thermals in check
  • CL22 latency tuned for stable ASUS TRX40 compatibility
  • 288-pin UDIMM form factor drops straight into desktop slots

Kit purpose and audience

This 16 GB DDR4 3200 kit targets owners of the ASUS TRX40 Zenith II Extreme motherboard who need a matched pair of 8 GB UDIMM modules. The CL22 latency and 1.2 V rating follow the standard JEDEC profile for straightforward installation without manual tuning.

Who should consider alternatives

Builders requiring ECC error correction, registered buffering or higher capacities per module should look elsewhere. Systems that demand lower latency timings or speeds above 3200 MT/s will not be satisfied by this specification.

What the bundle changes

The package supplies two identical 1Rx8 sticks tested together for dual-channel operation on the named board. No heat spreaders, RGB lighting, extra cables or software utilities are included beyond the modules themselves.

Highlights

  • Dual-channel 16 GB kit boosts multitasking headroom
  • DDR4 3200 MT/s speed matches motherboard spec
  • Low 1.2 V operation keeps thermals in check
  • CL22 latency tuned for stable ASUS TRX40 compatibility
  • 288-pin UDIMM form factor drops straight into desktop slots

Specifications

BrandNEMIX RAM
SeriesASUS Gaming Motherboard Compatible Series Memory
ModelASUS DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASUS
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

Does my ASUS TRX40 ROG Zenith II Extreme motherboard need a specific BIOS setting to run this 3200 CL22 kit at its rated speed?

The kit runs at 1.20 V with CL22 timings; enable the XMP or DOCP profile in the motherboard BIOS to apply the 3200 MT/s frequency automatically.

Can I add this 2 x 8 GB kit alongside the 8 GB DDR4 modules already installed in my system?

Mixing kits with different ranks or timings can cause instability; for best results populate all slots with identical 1Rx8 CL22 modules running at the same 1.20 V.

After installation, how do I verify the kit is operating at the correct 3200 MT/s data rate?

Open the BIOS or a system-information utility and check that the memory frequency is reported as 3200 MT/s with CL22-22-22 timings at 1.20 V.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.