We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 SODIMM sticks side by side, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB 2x8GB DDR4 3200 CL22 260-Pin SODIMM Kit POSIFLEX ZT-3115

SKU CH-X3DG-FVD6A

DDR4 3200 SODIMM kit adds 16 GB across two 8 GB modules for POSIFLEX ZT-3115 terminals

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 3200 MHz PC4-25600 speed matches system spec
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM form factor fits POSIFLEX ZT-3115 slots
  • Non-ECC unbuffered 2Rx8 modules built with major OEM chips

POSIFLEX ZT-3115 memory kit

This 16 GB kit is built for the POSIFLEX ZT-3115 Haydn ZT series point-of-sale terminal. It contains two 8 GB DDR4 3200 SODIMM modules that match the system's required 260-pin form factor and 1.20 V operating voltage.

DDR4 3200 SODIMM limits

DDR4 3200 (PC4-25600) sets the maximum data rate this platform can use; faster modules will simply run at this speed. The CL22 latency and 2Rx8 dual-rank organisation are fixed by the specification, so tighter timings or single-rank alternatives cannot be selected.

Upgrade from lower capacity or speed

Replacing a smaller kit or slower DDR4 SODIMMs adds headroom for multi-tasking POS applications and reduces swap activity. The jump is worthwhile when the terminal currently runs with less than 16 GB or operates below 3200 MT/s.

Highlights

  • 16 GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 3200 MHz PC4-25600 speed matches system spec
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM form factor fits POSIFLEX ZT-3115 slots
  • Non-ECC unbuffered 2Rx8 modules built with major OEM chips

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

Questions about this item

Should I pick the 16GB 2x8GB kit or a single 16GB module for the POSIFLEX ZT-3115?

The kit supplies two matched 8GB SODIMMs for dual-channel operation, which the ZT-3115 platform can utilise for higher memory bandwidth than a single 16GB stick.

What does the 3200 MT/s rating deliver inside the POSIFLEX ZT-3115?

The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.2 V, giving the terminal the rated throughput the platform negotiates at boot.

Does the 260-pin DDR4 SODIMM interface limit speed or capacity in this terminal?

The 260-pin DDR4 SODIMM form factor carries the 3200 MT/s signal and 8 GB per rank; the ZT-3115 chipset caps the bus at that speed and supports the 16 GB kit density.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.