NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 260-Pin SODIMM Kit for POSIFLEX ZT-3115E
16 GB dual-channel DDR4 3200 CL22 SODIMM kit for POSIFLEX ZT-3115E terminals
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 kit boosts POS terminal responsiveness
- 3200 MHz PC4-25600 speed handles transaction workloads
- CL22 latency at 1.2 V keeps power draw low
- 260-pin SODIMM form factor fits POSIFLEX ZT-3115E slots
- Two 8 GB modules enable dual-channel bandwidth
POSIFLEX ZT-3115E DDR4 SODIMM Kit
This 16GB kit contains two 8GB DDR4 3200 modules built specifically for the POSIFLEX ZT-3115E Haydn ZT Series POS terminal. It targets retailers and system integrators who need reliable memory for point-of-sale workloads. The 260-pin SODIMM form factor matches the terminal's memory slots exactly.
Tool-free slot access in minutes
The SODIMM modules insert directly into the terminal's memory slots without tools or cables. Common issues include forcing a module at the wrong angle, which can bend the 260-pin connector, or mixing this kit with existing memory of a different speed or latency. Always power down and disconnect the terminal before starting.
CL22 latency at 1.20V operation
The kit runs at CAS latency 22 with a standard 1.20V supply, matching the terminal's memory controller requirements. This timing and voltage combination is the single specification that confirms compatibility with the POSIFLEX ZT-3115E system. Builders needing ECC, registered modules, or a different latency should look elsewhere.
Highlights
- 16 GB DDR4 kit boosts POS terminal responsiveness
- 3200 MHz PC4-25600 speed handles transaction workloads
- CL22 latency at 1.2 V keeps power draw low
- 260-pin SODIMM form factor fits POSIFLEX ZT-3115E slots
- Two 8 GB modules enable dual-channel bandwidth
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT |
Questions about this item
How do I confirm the kit runs at 3200 MT/s with CL22 after installation?
Open Task Manager or CPU-Z and verify the memory tab shows 3200 MT/s speed and CL22 timings at 1.20 V.
What comes in the box and is anything else required?
The box contains two 8 GB 260-pin DDR4 SODIMM modules; no extra parts or tools are needed for the POSIFLEX ZT-3115E.
Which capacity should I choose for the ZT-3115E?
This 16 GB kit (2 x 8 GB) is the matched set validated for the POSIFLEX ZT-3115E.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
$174.99
0.00210282BTC
In stock
