We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 SODIMM modules side by side

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 260-PIN SODIMM Kit for POSIFLEX XT-3817-G2 JIVA Foldable 17 Terminal

SKU CH-ENR6-A2QJ8

A 16 GB DDR4 SODIMM kit running at 3200 MHz CL22, built for the POSIFLEX XT-3817-G2 JIVA Foldable 17 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking on POS terminals
  • DDR4 3200 MT/s speed matches system specification
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM form factor fits the XT-3817-G2 JIVA 17 slot
  • Major OEM chips tested under load for stable operation

DDR4 SODIMM kit for POSIFLEX XT-3817-G2

This NEMIX RAM kit delivers 16GB across two 8GB modules built for the POSIFLEX XT-3817-G2 JIVA Foldable 17 terminal. It runs at DDR4 3200 with CL22 latency and 1.20V operation. The unbuffered non-ECC design suits point-of-sale workloads that need reliable memory upgrades.

Verify SODIMM slots and voltage before ordering

Confirm the terminal accepts 260-pin DDR4 SODIMM modules and has two free slots for the dual-channel kit. The system must support 1.2V DDR4 3200 speeds and unbuffered non-ECC memory. Check the service manual for maximum capacity per slot and any BIOS restrictions.

Low-voltage modules run cool without spreaders

Operating at 1.20V, these 2Rx8 modules generate minimal heat during continuous terminal operation. No heat spreaders are fitted, keeping the profile thin for tight SODIMM sockets. Expect silent passive cooling with typical POS workloads and no added power draw beyond the rated voltage.

Highlights

  • 16 GB dual-channel kit boosts multitasking on POS terminals
  • DDR4 3200 MT/s speed matches system specification
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM form factor fits the XT-3817-G2 JIVA 17 slot
  • Major OEM chips tested under load for stable operation

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

Questions about this item

Does the kit include both 8 GB modules or do I need to buy a second stick separately?

The kit contains two 8 GB SODIMMs for a total of 16 GB, so no additional modules are required.

How do I choose between the 3200 MHz CL22 specification and other speed or latency options?

This kit is a single 3200 MHz CL22 configuration validated for the POSIFLEX XT-3817-G2 JIVA Foldable 17 terminal; select it when your system calls for DDR4 3200 non-ECC unbuffered memory.

Will the advertised 3200 MHz speed actually run at that rate once installed in the terminal?

The modules are rated at 3200 MHz (PC4-25600) and will operate at that speed provided the terminal's memory controller supports DDR4 3200.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.