We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 1.2V 288-pin UDIMM SuperMicro MBD-C9Z590-CGW memory upgrade

SKU CH-1Y1H-V3PA2

16 GB DDR4 3200 CL22 1.2 V 288-pin UDIMM kit for SuperMicro MBD-C9Z590-CGW workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 3200 CL22 timing balances speed and latency
  • 20 V low voltage reduces system power draw
  • 288-pin UDIMM form factor fits SuperMicro MBD-C9Z590-CGW
  • Major OEM chips ensure validated compatibility

System-Specific DDR4 Kit

This 16 GB kit contains two 8 GB DDR4 3200 modules built for the SuperMicro MBD-C9Z590-CGW motherboard. They run at 1.2 V with CL22 latency and use a 1Rx8 unbuffered non-ECC layout. The kit targets owners of that specific board who want a straightforward capacity increase.

DDR4 3200 Practical Limits

The modules operate at the DDR4 3200 (PC4-25600) data rate with a fixed CL22 timing and 1.2 V voltage. Your motherboard must support this exact speed and voltage combination; it will not automatically run faster or at lower latency. The 288-pin UDIMM form factor fits only DDR4 desktop slots.

Pre-Order Compatibility Check

Confirm that your system is the SuperMicro MBD-C9Z590-CGW and that it accepts non-ECC unbuffered UDIMMs. Verify the board has two free DDR4 slots for the dual-channel pair. Ensure the BIOS is updated to recognise 3200 MT/s modules at 1.2 V.

Highlights

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 3200 CL22 timing balances speed and latency
  • 20 V low voltage reduces system power draw
  • 288-pin UDIMM form factor fits SuperMicro MBD-C9Z590-CGW
  • Major OEM chips ensure validated compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

Should I pick the 16GB kit or a larger capacity for my SuperMicro MBD-C9Z590-CGW?

The listed kit provides 16GB in two 8GB modules; choose a larger kit only if your workload needs more than 16GB total.

What does the 3200 speed mean once installed in my system?

The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.20V, delivering the rated throughput when the motherboard enables the matching profile.

Is the 288-pin UDIMM interface compatible with my board and what does it limit?

Yes, the 288-pin DDR4 UDIMM fits the MBD-C9Z590-CGW DIMM slots; the interface caps transfer rate to the DDR4 3200 standard and does not support registered or ECC operation.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.