We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 1.2V 288-pin UDIMM kit AMD TRX40 memory upgrade

SKU CH-BC01-XVPN6

16 GB dual-channel DDR4 kit at 3200 MT/s, CL22, 1.2 V, 288-pin UDIMM for AMD TRX40 boards

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit adds responsive capacity for multitasking
  • DDR4 3200 speed moves data quickly through the system
  • CL22 latency keeps timing tight for stable operation
  • 2 V low voltage reduces power draw and heat
  • 288-pin UDIMM form factor fits AMD TRX40 motherboards

AMD TRX40 compatible DDR4 kit

This 16 GB kit contains two 8 GB DDR4 3200 modules built for AMD TRX40 chipset motherboards. It runs at 1.2 V with CL22 latency and uses unbuffered non-ECC 288-pin UDIMM form factor. The modules are single-rank 1Rx8 using major OEM chips.

Sustained load behaviour

Rigorous stress testing under load is performed to verify stability during extended workloads. The 1.2 V operating voltage helps maintain consistent thermal characteristics over long sessions. Unbuffered topology keeps signal paths short for reliable data integrity.

Pre-order checklist

Confirm your motherboard uses the AMD TRX40 chipset and supports DDR4 3200 UDIMM memory. Verify four 288-pin DIMM slots are available for the two-module kit. Check that your system accepts non-ECC unbuffered memory at 1.2 V.

Highlights

  • 16 GB kit adds responsive capacity for multitasking
  • DDR4 3200 speed moves data quickly through the system
  • CL22 latency keeps timing tight for stable operation
  • 2 V low voltage reduces power draw and heat
  • 288-pin UDIMM form factor fits AMD TRX40 motherboards

Specifications

BrandNEMIX RAM
SeriesASUS Gaming Motherboard Compatible Series Memory
ModelASUS DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASUS
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx6 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

Does the kit run hot or draw extra power at 1.2 V when installed in an AMD TRX40 system?

The modules operate at the standard DDR4 voltage of 1.2 V and have no heat spreader, so thermal output and power draw remain at baseline levels for CL22 3200 MHz UDIMMs.

What motherboard slot and chipset must I already have for this 288-pin kit to function?

You need a motherboard with DDR4 288-pin UDIMM slots and an AMD TRX40 chipset; the kit is validated for that platform and will not fit DDR5 or registered DIMM sockets.

Will the CL22 timing cause instability if I keep my existing 3200 MHz CL16 sticks in the other channels?

Mixing CL22 with tighter-timing modules forces the memory controller to run all channels at the slowest common latency, so the system will operate at CL22 speeds across the board.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.