NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 SODIMM Kit for POSIFLEX RT-6116
16 GB DDR4 SODIMM kit with two 8 GB modules at 2400 MHz CL17 for POSIFLEX RT-6116 terminals
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB kit boosts POS terminal responsiveness
- DDR4 2400 speed matches POSIFLEX RT-6116 specs
- CL17 latency supports stable transaction processing
- 2 V operation keeps power draw low
- 260-pin SODIMM form factor fits the terminal slot
System-specific DDR4 SODIMM kit
This 16GB kit contains two 8GB modules built for the POSIFLEX RT-6116 terminal. Each stick is a 260-pin DDR4 SODIMM rated at 2400 MT/s with CL17 latency. The unbuffered, non-ECC design matches the original system specification.
Low-voltage operation without active cooling
Modules run at 1.20V and have no heat spreader, relying on the terminal's internal airflow. The 2Rx8 organisation and standard JEDEC timings keep power draw predictable during continuous point-of-sale workloads. No fan or extra clearance is required.
Ready-to-install matched pair
The kit ships as a validated 2x8GB set so both slots receive identical modules. No software, drivers or configuration utilities are bundled; the upgrade is completed by physical installation alone. Buyers needing ECC, registered DIMMs or higher capacities must choose a different product.
Highlights
- 16 GB kit boosts POS terminal responsiveness
- DDR4 2400 speed matches POSIFLEX RT-6116 specs
- CL17 latency supports stable transaction processing
- 2 V operation keeps power draw low
- 260-pin SODIMM form factor fits the terminal slot
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS19200-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT |
Questions about this item
How do I install the 260-pin SODIMM kit in the RT-6116 and what step is often missed?
Power off the terminal, open the memory door, align the notch on each 260-pin module with the slot key, press firmly until the side clips click, then replace the cover and power on to verify 16 GB is detected.
What maintenance or replacement will this 1.20 V DDR4 kit need later?
No scheduled maintenance is required; the modules have no heat spreader and run at 1.20 V, so only replace them if a memory test reports errors or the terminal fails to boot.
What limit appears first when the POSIFLEX RT-6116 runs sustained workloads with CL17 memory?
The CL17 latency at 2400 MT/s sets the bandwidth ceiling; under continuous load the memory controller hits that timing limit before thermal throttling becomes a factor.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
$174.99
0.00210282BTC
In stock
