NEMIX RAM 8GB DDR3 1600 1.35V 204-pin SODIMM laptop RAM
- 8GB
- 204-Pin DDR3 SO-DIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 16 GB dual-channel DDR3 kit running at 1600 MHz with CL11 latency and low 1.35 V power draw for 204-pin laptop slots
Capacity 16GB (2 x 8GB)
This NEMIX RAM kit provides 16 GB of DDR3 memory as two 8 GB unbuffered non-ECC SODIMMs. The modules run at 1600 MHz with CL11 latency at 1.35 V. They are intended for laptops, all-in-one PCs, small-form-factor desktops and compatible NAS devices.
The 204-pin layout and low-voltage operation fit many legacy notebooks and compact systems that accept PC3-12800 memory. It is not suitable for systems that require registered or ECC modules, nor for platforms that only support higher-density single modules or different pin counts.
Verify that your device specifically supports 1.35 V DDR3 SODIMMs at 1600 MHz with CL11 timing. The 2Rx8 organisation and unbuffered design must match the motherboard's memory-controller requirements for the kit to function correctly.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS12800-828LK2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The modules run at DDR3 1600 with CL11 timing; sustained throughput is capped by that speed and latency combination.
At 1.35 V the kit draws less power than standard 1.5 V DDR3, so heat output stays low even under continuous load.
Yes, the kit provides two 204-pin DDR3 SO-DIMMs totalling 16 GB, exactly matching a two-slot configuration.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?