We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 SODIMM sticks with black chips, 204-pin, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM Kit POSIFLEX HC-1521IR memory upgrade

SKU CH-581Z-YRHVS

16 GB DDR3 SODIMM kit for POSIFLEX HC-1521IR terminals, two 8 GB modules at 1333 MHz CL9 1.35 V

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 16GB dual-channel kit boosts POS terminal responsiveness
  • DDR3 1333 PC3-10600 speed matches system specification
  • Low 1.35V operation reduces power draw and heat
  • 204-pin SODIMM form factor fits POSIFLEX HC-1521IR slots
  • Rigorously stress-tested modules ensure reliable uptime

POSIFLEX HC-1521IR memory kit

This 16 GB DDR3 SODIMM kit is built for the POSIFLEX HC-1521IR point-of-sale terminal. It contains two 8 GB modules that install directly into the system's 204-pin slots. The upgrade targets operators who need more headroom for simultaneous POS applications.

204-pin unbuffered non-ECC layout

Modules use a standard 204-pin SODIMM edge connector with no heat spreader, keeping the profile low enough for the terminal's tight chassis. The unbuffered, non-ECC design matches the motherboard's memory controller without requiring registered DIMM support. Major-brand DRAM from Samsung, Micron or Hynix is used throughout.

1.35 V low-voltage operation at 1333 MHz

Each module runs at 1.35 V while rated for 1.50 V, reducing power draw and heat inside the sealed enclosure. CL9 latency at DDR3-1333 (PC3-10600) delivers stable throughput for transaction workloads. No active cooling is needed, so the terminal remains silent during extended shifts.

Highlights

  • 16GB dual-channel kit boosts POS terminal responsiveness
  • DDR3 1333 PC3-10600 speed matches system specification
  • Low 1.35V operation reduces power draw and heat
  • 204-pin SODIMM form factor fits POSIFLEX HC-1521IR slots
  • Rigorously stress-tested modules ensure reliable uptime

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

Does the DDR3 1333 PC3-10600 interface limit the POSIFLEX HC-1521IR to 1333 MHz memory speed?

Yes, the DDR3 1333 PC3-10600 specification caps the memory bus at 1333 MHz for this terminal.

Will the 204-pin SODIMM modules fit the POSIFLEX HC-1521IR memory slots without an adapter?

Yes, the 204-pin DDR3 SODIMM form factor matches the slots used in the HC-1521IR.

Do I need to configure any BIOS settings after installing the 2Rx8 modules, or is it plug-and-play?

Installation is plug-and-play; the system detects the 2Rx8 modules automatically with no BIOS changes required.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.