NEMIX RAM 128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V CL52 288-PIN ECC RDIMM memory upgrade
- 128GB
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
128 GB DDR5 5600 registered ECC RDIMM at CL46 1.1 V, 4Rx4, validated for the Supermicro X14SDI-36C-SP3F motherboard
This registered DDR5 module delivers 128GB at 5600 MT/s with CL46 latency and 1.10V operation. It targets administrators upgrading the Supermicro X14SDI-36C-SP3F motherboard where exact rank, voltage and timing compliance are required for full-capacity recognition.
The 288-pin RDIMM form factor matches the board's registered DIMM slots and cannot be used in UDIMM or SODIMM sockets. A registered buffer reduces electrical load on the memory controller, allowing every populated slot to run at the rated 5600 speed without signal degradation.
DDR5 at 5600 MT/s provides the bandwidth ceiling for this module; population rules in the motherboard manual dictate maximum supported capacity per channel. ECC corrects single-bit errors on the fly, but uncorrectable multi-bit errors still require a reboot. Consult the system manual for approved DIMM configurations before installation.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-744K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
It operates at DDR5 5600 with a PC5-44800 data rate, matching the Supermicro X14SDI-36C-SP3F memory controller specification.
A single 288-pin DDR5 RDIMM slot; the module is a registered DIMM with no heat spreader, so it fits the board's standard RDIMM sockets.
Power down, open the chassis, align the notch on the 288-pin edge connector, press firmly until the retention clips lock, then verify in BIOS that the full 128 GB is recognised at 5600 MT/s with ECC active.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?