NEMIX RAM
NEMIX RAM 128GB (8x16GB) DDR5 6400MHz CL52 1.1V ECC RDIMM for ASRock Rack W890D8-2L2T memory upgrade
128 GB kit of eight 16 GB DDR5 6400 MHz CL52 ECC RDIMMs at 1.1 V for ASRock Rack W890D8-2L2T
- Capacity128GB (8 x 16GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemASRock
- 128 GB total capacity from eight 16 GB modules
- DDR5 6400 MHz speed with CL52 latency
- 1 V operation reduces power draw
- ECC RDIMM registered design improves data integrity
- Validated for ASRock Rack W890D8-2L2T motherboard
128GB DDR5 ECC RDIMM kit
This NEMIX RAM kit provides 128GB of DDR5 memory across eight 16GB registered DIMMs. It operates at 6400MHz with CL52 latency and a 1.1V voltage. The modules use 1Rx8 organisation and 288-pin DDR5 RDIMM form factor for server and workstation platforms.
For ASRock Rack W890D8-2L2T upgrades
This memory kit is validated for the ASRock Rack W890D8-2L2T motherboard. It suits administrators expanding registered ECC capacity on that specific platform. Builders needing unbuffered UDIMMs, non-ECC modules, or different pin counts should look elsewhere.
Eight modules fill eight slots
The 8x16GB configuration occupies all eight DIMM slots on compatible boards, delivering the full 128GB capacity in a single kit. Headroom ends when the platform's maximum registered DIMM limit or memory-controller speed ceiling is reached.
Highlights
- 128 GB total capacity from eight 16 GB modules
- DDR5 6400 MHz speed with CL52 latency
- 1 V operation reduces power draw
- ECC RDIMM registered design improves data integrity
- Validated for ASRock Rack W890D8-2L2T motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K8 |
| Capacity | 128GB (8 x 16GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB (8 x 16GB) DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Does my ASRock Rack W890D8-2L2T motherboard need to support DDR5 6400MHz ECC RDIMMs for this kit to work?
Yes, the board must accept 288‑pin DDR5 RDIMMs at 6400MHz with ECC and registered operation; the W890D8‑2L2T is the qualified platform for this 128GB kit.
Will these 1Rx8 modules run alongside any existing RDIMMs of a different rank or speed already installed in the server?
All slots should use matching 1Rx8 DDR5 6400MHz CL52 1.1V RDIMMs; mixing ranks or speeds can prevent the system from training memory correctly.
How can I confirm the kit is running at 6400MHz CL52 with ECC active after installation?
Check the BIOS memory information or OS tools such as dmidecode to verify 6400MHz data rate, CL52 latency, 1.1V voltage and ECC enabled on all eight modules.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



