NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 5600MHz CL46 1.1V 2Rx8 288-Pin UDIMM for ASRock Rack W680D4U-2L2T/G5
A 128 GB kit of four 32 GB DDR5 modules running at 5600 MHz with CL46 latency and 1.1 V operation, built for the ASRock Rack W680D4U-2L2T/G5 motherboard
- Capacity128GB (4 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128GB total capacity across four 32GB modules
- DDR5 5600MHz speed rated at PC5-44800
- Low 1.1V operating voltage reduces power draw
- CL46 CAS latency for responsive operation
- 288-pin UDIMM form factor fits compatible desktop boards
128GB DDR5 Kit for ASRock Rack W680D4U
This 128GB kit contains four 32GB DDR5 5600MHz modules built for the ASRock Rack W680D4U-2L2T/G5 motherboard. It targets administrators and integrators who need maximum supported capacity on that platform. The unbuffered non-ECC design matches the board's desktop-class memory slots.
Sustained Load Behaviour at CL46 1.10V
Running at the rated 5600MHz with CL46 latency and 1.10V, the 2Rx8 organisation keeps bandwidth stable during long compile jobs or virtualisation workloads. Without a heat spreader the modules rely on chassis airflow, so sustained throughput depends on case cooling rather than on-board thermal mass.
Pre-Install Checks for 288-Pin UDIMM Slots
Verify the motherboard is the exact W680D4U-2L2T/G5 model and that all four 288-pin DDR5 slots are free. Confirm the BIOS is recent enough to initialise 128GB of non-ECC UDIMM memory at 5600MHz. Ensure your chassis provides adequate airflow over bare modules since no spreaders are fitted.
Highlights
- 128GB total capacity across four 32GB modules
- DDR5 5600MHz speed rated at PC5-44800
- Low 1.1V operating voltage reduces power draw
- CL46 CAS latency for responsive operation
- 288-pin UDIMM form factor fits compatible desktop boards
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
Does the 1.1V operating voltage keep the 128GB kit cool during continuous operation?
The modules run at the standard DDR5 voltage of 1.10V and have no heat spreader, so they rely on case airflow to stay cool under sustained load.
Must the ASRock Rack W680D4U-2L2T/G5 motherboard already be installed for this memory to work?
Yes, this 288-pin UDIMM kit is validated for that specific board and will not function without a compatible DDR5 platform.
Can I add this 2Rx8 CL46 kit to a system that already has slower DDR5 modules installed?
All four 32GB sticks share the same 5600MHz speed and CL46 timing; mixing with slower DDR5 will force the system to run at the lower speed and looser latency.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



