We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 CL46 2Rx8 1.1V ECC RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-F348-4GAJP

A 128 GB DDR5 ECC registered kit built for the Supermicro H13SSL-N motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Show 24 more configurations
  • 128 GB total capacity from four 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 10 V operation matches the motherboard memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H13SSL-N exactly

128GB DDR5-5600 ECC RDIMM kit

This 128GB kit contains four 32GB DDR5-5600 Registered ECC modules built to the PC5-44800 standard. Each DIMM runs at 1.10V with CL46 latency and a 2Rx8 organisation. The 288-pin RDIMM form factor matches the Supermicro H13SSL-N memory slots exactly.

Suited to the Supermicro H13SSL-N

Registered ECC architecture lets every slot stay populated at full capacity while correcting single-bit errors on the fly. Builders using UDIMM or SODIMM platforms, or boards that cannot accept Registered modules, must choose a different memory type.

Four ranks per module at rated speed

The 2Rx8 layout delivers four ranks per DIMM so the memory controller sees the full 128GB at DDR5-5600 without down-clocking. Systems limited to fewer ranks per channel or lower maximum capacity will not reach this density.

Highlights

  • 128 GB total capacity from four 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 10 V operation matches the motherboard memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H13SSL-N exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Do I need a Supermicro H13SSL-N motherboard with 288-pin DDR5 RDIMM slots to install this 128GB kit?

Yes, this kit is built for the Supermicro H13SSL-N and requires a motherboard that accepts 288-pin DDR5 registered DIMMs; it will not fit UDIMM or SODIMM slots.

Can I add these 2Rx8 CL46 modules to a server that already has DDR5 RDIMMs of a different rank or speed?

Mixing ranks or speeds is not recommended; the board's memory controller expects identical 2Rx8 CL46 modules at 5600 MT/s for full-capacity operation.

How can I confirm the kit is running at 5600 MT/s with ECC active after installation?

Check the BIOS memory information or the OS memory report — both should show 128 GB at 5600 MT/s, CL46, 1.1 V, with ECC enabled.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.