NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 5600 CL46 1.1V UDIMM for ASRock Z790 Riptide WiFi memory upgrade
128 GB kit of four 32 GB DDR5 modules at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the ASRock Z790 Riptide WiFi motherboard
- Capacity128GB (4 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB total capacity with four 32 GB DDR5 modules
- 5600 MT/s DDR5 speed rated at PC5-44800 for high bandwidth
- CL46 CAS latency at 1.1 V for efficient operation
- 288-pin UDIMM form factor built for ASRock Z790 Riptide WiFi
- Dual-rank 2Rx8 chips from Samsung, Micron or Hynix for stability
128GB DDR5 Kit for ASRock Z790 Riptide
This 128GB kit contains four 32GB DDR5 UDIMM modules rated at 5600MHz with CL46 latency. It is built specifically for the ASRock Z790 Riptide WiFi motherboard using unbuffered non-ECC memory. The kit targets users who need maximum supported capacity on this platform.
Check DDR5 Slot Count and CPU Support
Verify your motherboard has four DDR5 slots and that your installed processor supports 128GB total capacity at 5600MHz. The modules require 1.10V operating voltage and fit standard 288-pin DDR5 sockets. Confirm the board accepts 2Rx8 dual-rank modules before ordering.
Four Modules Fill Every Slot
Populating all four slots delivers the full 128GB capacity without leaving empty sockets for future expansion. The dual-rank 2Rx8 organisation works with the memory controller at the rated PC5-44800 speed. No heat spreaders are fitted so clearance for large CPU coolers remains unrestricted.
Highlights
- 128 GB total capacity with four 32 GB DDR5 modules
- 5600 MT/s DDR5 speed rated at PC5-44800 for high bandwidth
- CL46 CAS latency at 1.1 V for efficient operation
- 288-pin UDIMM form factor built for ASRock Z790 Riptide WiFi
- Dual-rank 2Rx8 chips from Samsung, Micron or Hynix for stability
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR5 5600MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT |
Questions about this item
Does the kit include all four 32 GB modules or must any be purchased separately?
The package contains the full 128 GB kit — four 32 GB DDR5 5600 UDIMMs — so nothing else is required for installation.
Should I pick this 128 GB CL46 kit or a lower-capacity option for the ASRock Z790 Riptide WiFi?
Choose this 128 GB (4 x 32 GB) CL46 kit if you need maximum capacity; select a smaller kit only if 128 GB exceeds your workload requirements.
What does the 5600 MT/s rating mean once the memory is installed in the Z790 Riptide WiFi?
The modules will run at DDR5 5600 (PC5-44800) with CL46 latency at 1.10 V, delivering the rated speed and timing on this motherboard.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



