We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM modules with black chips and gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 CL46 1.1V 288-Pin UDIMM Dell Precision 7 T1 memory upgrade

SKU CH-AW8V-DPTSQ

128 GB kit of four 32 GB DDR5 modules running at 5600 MT/s with CL46 latency and 1.1 V operation, built for Dell Precision 7 T1 desktops

  • Capacity128GB (4 x 32GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB total capacity from four 32 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • Low 1.1 V operating voltage reduces power draw
  • CL46 CAS latency for responsive data access
  • 288-pin UDIMM form factor fits Dell Precision 7 T1

Target system and kit layout

This 128GB kit is built for the Dell Pro Precision 7 T1 desktop and ships as four 32GB modules. Each module is a 288-pin DDR5 UDIMM running at 5600 speed with CL46 latency and 1.10V operation.

Upgrade path from lower-capacity DDR5

The kit replaces smaller DDR5 configurations in the same platform when workloads demand more simultaneous threads or larger datasets. The jump is worthwhile when the current memory limit forces paging or prevents the full core count from being fed.

Sustained-load behaviour

The 2Rx8 organisation and standard JEDEC voltage keep power draw predictable during long compute sessions. Without a heat spreader the modules rely on chassis airflow, so adequate case ventilation is required to maintain the rated 5600 transfer rate over extended periods.

Highlights

  • 128 GB total capacity from four 32 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • Low 1.1 V operating voltage reduces power draw
  • CL46 CAS latency for responsive data access
  • 288-pin UDIMM form factor fits Dell Precision 7 T1

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K4
Capacity128GB (4 x 32GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB (4 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Questions about this item

Does the 288-pin DDR5 UDIMM form factor fit the Dell Precision 7 T1 memory slots?

Yes, the kit uses standard 288-pin DDR5 UDIMM modules that match the Precision 7 T1 desktop slots.

What is the correct order for installing the four 32GB modules into the Precision 7 T1?

Populate the slots in the sequence shown in the Dell service manual, typically starting with the slot closest to the CPU, and press each module until the retention clips click.

When should the memory be tested again after the initial install?

Re-run a memory diagnostic if the system shows random crashes, data corruption or fails to recognise the full 128GB capacity.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.