NELSON PAINT 29 Boundary Marking Paint Red 1 gal 3.78 L
Water-based boundary marking paint covering 1320 linear feet per gallon, drying tack-free in 15 minutes and ready for extreme conditions from -14 to 90 degrees Fahrenheit
- ColorRed
- Water-based formula simplifies clean-up and reduces odour
- Covers 1320 linear feet per 2-inch stripe for efficient boundary marking
- Touch-dry in 15 minutes and fully dry in 30 minutes to minimise downtime
- Applies by brush or spray in temperatures from -14 °F to 90 °F for year-round use
- Meets OSHA standards for safety compliance on job sites
Boundary Marking Paint Red 1 gal
This water-based boundary marking paint comes in a one-gallon container and is designed for line striping on wood and other surfaces. It can be applied with a brush, spray or marking gun depending on the project requirements. The product is intended for professional and industrial users who need durable, high-visibility markings in demanding environments.
Upgrading from aerosol or smaller cans
Switching from aerosol striping cans or smaller paint containers is worthwhile when a job calls for 1320 linear feet of two-inch striping or when consistent coverage over large areas is required. The larger volume reduces the frequency of refills on extended projects such as parking lots, warehouses or sports fields. Buyers who only need occasional touch-ups or short runs will not benefit from the one-gallon size.
Installation and common issues
Application is straightforward: stir the paint, then apply by brush, spray or marking gun at temperatures between -14 and 90 degrees Fahrenheit. The coating becomes tack-free in 15 minutes and fully dry in 30 minutes under normal conditions. Common problems include spraying outside the recommended temperature range, which can cause uneven film build, and failing to clean marking-gun nozzles promptly, leading to clogged tips.
Highlights
- Water-based formula simplifies clean-up and reduces odour
- Covers 1320 linear feet per 2-inch stripe for efficient boundary marking
- Touch-dry in 15 minutes and fully dry in 30 minutes to minimise downtime
- Applies by brush or spray in temperatures from -14 °F to 90 °F for year-round use
- Meets OSHA standards for safety compliance on job sites
Specifications
| Brand | NELSON PAINT |
|---|---|
| Color | Red |
Questions about this item
What surface preparation does the red boundary marking paint need before brushing or spraying?
The paint is formulated for wood surfaces and applies directly by brush or spray without a separate primer coat.
Which step is most often missed when using this paint with a marking gun?
Users frequently forget to confirm the gun is set for water-based material and that the ambient temperature is between -14 and 90 °F before starting.
When will a fresh 1 gal container need to be replaced on a typical striping job?
One gallon covers 1320 linear feet of 2-inch striping, so replacement depends on the total line length you plan to mark.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
