Neewer Sensyne 10" Ring Light 50" Tripod Studio
A 10-inch LED ring light with touch control, three colour modes, ten brightness levels and a Bluetooth remote, on a tripod that extends from 15.7 to 50 inches
- Partsensyne
- ColorNature
- Specificationsensyne, 6 L x 4 W x 4 H centimeters, 110 grams, 12 months
- CompatibilityUSB
- Featuresusb, bluetooth, USB
- Dimension14.33in W x 12.83in H x 9.06in D
- Touch-sensitive panel adjusts 3 colour modes and 10 brightness levels
- Extends from 15.7 to 50 inches for tabletop or standing use
- Spring-loaded phone holder fits devices up to 5.3 inches wide
- Bluetooth remote triggers shutter from up to 30 feet away
- USB-powered operation requires 5V 2A source for 10W rated output
Compact Ring Light Kit
The Neewer Sensyne 10 inch ring light ships with a 50 inch extendable tripod and a spring-loaded phone holder. Touch controls on the unit cycle through three colour modes and ten brightness levels. A Bluetooth remote triggers the camera shutter from up to 30 feet away. The kit draws power from any USB source rated at 5V 2A.
Content Creators and Mobile Users
Streamers, vloggers and makeup artists gain a portable, height-adjustable light that fits on a desk or extends to standing height. The phone clamp opens to 5.3 inches and grips most handsets with or without a case. Photographers needing off-camera flash power or studios requiring mains-only fixtures should look elsewhere.
USB Power Requirement
The light is rated at 10W and must be connected to a 5V 2A USB supply while in use; no internal battery is fitted. Insufficient current will prevent the LEDs from reaching full output or cause flicker. Verify that your power bank, adapter or port meets this spec before purchase.
Highlights
- Touch-sensitive panel adjusts 3 colour modes and 10 brightness levels
- Extends from 15.7 to 50 inches for tabletop or standing use
- Spring-loaded phone holder fits devices up to 5.3 inches wide
- Bluetooth remote triggers shutter from up to 30 feet away
- USB-powered operation requires 5V 2A source for 10W rated output
Specifications
| Brand | Neewer |
|---|---|
| Model | sensyne |
| Part Number | sensyne |
| Part | sensyne |
| Color | Nature |
| Specification | sensyne, 6 L x 4 W x 4 H centimeters, 110 grams, 12 months |
| Compatibility | USB |
| Features | usb, bluetooth, USB |
| Dimension | 14.33in W x 12.83in H x 9.06in D |
Questions about this item
What USB power source do I need to run the 10 W ring light?
Use any USB port or adapter that delivers at least 5 V and 2 A (10 W or higher). Lower output can cause the light to stay off, run dim, or flicker.
Will the spring-loaded phone holder fit my phone if it is wider than 5.3 inches?
The holder opens to a maximum of 5.3 inches, so phones wider than that will not fit securely.
How can I confirm the Bluetooth remote is paired and working after I unpack it?
Press the remote button; the phone should take a photo or start recording from up to 30 feet away without any app installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



