We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel scissor boom arm with desk clamp and cable straps, 80 cm reach, 1.5 kg load

Neewer NW-35 Microphone Boom Arm Stand 80 cm 1.5 kg

SKU CH-8V7N-D2BFQ

Adjustable scissor arm holds microphones up to 1.5 kg with 360° rotation and 135° tilt

  • FinishBlack
  • Length80 centimeters
  • SpecificationNW-35, Clamp, 80 centimeters, Polished
  • FeatureNW-35
  • Dimension6.4008 cm x 13.1064 cm x 40.2844 cm
  • Weight21.3 ounces
  • Adjust the mic to any position with 360° rotation and 135° tilt
  • Supports microphones up to 1.5 kg with strong internal springs
  • Clamps securely to desks up to 5.3 cm thick with rubber padding
  • Includes 3/8 to 5/8 adapter for Blue Yeti and Snowball mics
  • Five cable straps keep wiring tidy along the 80 cm arm

Flexible studio reach

The Neewer NW-35 boom arm extends 80 centimeters and rotates 360 degrees with 135 degrees of tilt, letting podcasters and streamers position a microphone precisely without crowding the desk. Its scissor mechanism folds compactly for storage or transport between sessions.

Desk clamp and mic mounting

A padded C-clamp grips surfaces up to 5.3 centimeters thick, protecting the finish while anchoring the steel frame. The included 3/8 to 5/8 inch screw adapter and microphone clip accept shafts up to 3.2 centimeters, covering popular USB mics such as the Blue Yeti and Snowball, though the Yeti Nano requires a different thread.

Steady under continuous use

Internal springs and metal positioning screws hold up to 1.5 kilograms without sag during long recordings or live broadcasts. Five cable straps keep the mic lead tidy along the arm, preventing snag when the boom is repositioned mid-session.

Highlights

  • Adjust the mic to any position with 360° rotation and 135° tilt
  • Supports microphones up to 1.5 kg with strong internal springs
  • Clamps securely to desks up to 5.3 cm thick with rubber padding
  • Includes 3/8 to 5/8 adapter for Blue Yeti and Snowball mics
  • Five cable straps keep wiring tidy along the 80 cm arm

Specifications

BrandNeewer
Model40063970
Part Number21000030
FinishBlack
Length80 centimeters
SpecificationNW-35, Clamp, 80 centimeters, Polished
FeatureNW-35
Dimension6.4008 cm x 13.1064 cm x 40.2844 cm
Weight21.3 ounces

Questions about this item

How much weight can the NW-35 arm hold before it starts to sag during a long session?

The arm supports a maximum load of 1.5 kg or 3.3 lb, so any microphone and shock mount combination heavier than that will cause the springs to lose tension over time.

Does the steel construction and spring tension create noticeable hum or heat when the mic stays live all day?

The stand is a passive steel scissor arm with no motor or electronics, so it produces no electrical hum and generates no heat regardless of how long the microphone remains powered.

My desk is 5 cm thick — will the supplied clamp fit without extra hardware?

Yes, the desk clamp opens to 5.3 cm and includes rubber padding, so a 5 cm desktop fits within the adjustment range without additional parts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.