NEC Display Solutions
NEC VT470 180W Projector Lamp (VT75LP)
A new 180 W projector lamp module with a 2,000-hour rated life, supplied as a complete bulb-and-housing assembly for direct installation
- TypeProjector Lamp
- Wattage180W
- Lamp Life2,000 Hrs.
- Ready-to-install module with bulb and housing
- 180W NSH lamp matches original projector specs
- Rated 2,000 hours of projection time
- Built to ISO 9001 quality standards
- Tested for beam performance and reliable ignition
Direct replacement for VT470 projectors
This lamp module fits the NEC VT470 projector and ships as a fully assembled 180W NSH bulb inside its housing. It is intended for owners who need a new light source without sourcing a bare bulb and cage separately. Buyers who want a different wattage or a bare bulb only should look elsewhere.
Simple module swap with no extra parts
The unit arrives pre-assembled so installation is a single module exchange inside the projector. No alignment of a bare lamp or separate housing is required. The most common issue is forgetting to reset the projector's lamp-hour counter after fitting the new module, which can leave the replacement warning active.
Confirm the VT470 model before ordering
Check that your projector is the NEC VT470 and that the original lamp code is VT75LP; other NEC models use different modules. Verify the existing lamp shows 180W on its label to match this replacement. Ensure the projector's lamp compartment is clean and the air filter is clear so the new module reaches its rated 2,000-hour life.
Highlights
- Ready-to-install module with bulb and housing
- 180W NSH lamp matches original projector specs
- Rated 2,000 hours of projection time
- Built to ISO 9001 quality standards
- Tested for beam performance and reliable ignition
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 180W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How can I confirm the lamp is operating correctly after installation?
The projector should display a bright, stable image with no flickering and the lamp-hour counter will reset to zero, tracking up to 2,000 hours of rated life.
What components are included and is anything else required for installation?
The module arrives as a fully assembled 180W NSH bulb inside its housing, ready to fit the VT470 projector without extra parts or tools.
Which version should I choose among the OEM and compatible options?
All versions meet ISO 9001 quality checks for ignition, voltage and run-time; select the original OEM for exact factory matching or a compatible unit for lower cost.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



