NEC Display Solutions
NEC NP630 180W projector lamp NP14LP 4000 5000 hrs
Replacement 180 W lamp module with housing delivers 4,000 to 5,000 hours of operation
- TypeProjector Lamp
- Wattage180W
- Lamp Life4,000 (Normal) - 5,000 (Economy) Hrs.
- Genuine Philips NSH 180W bulb delivers reliable brightness
- Lamp life reaches 4000 hours in normal mode
- Economy setting extends use to 5000 hours
- Fully assembled housing enables quick installation
- Manufactured to ISO 9001 quality standards
NEC NP630 lamp module
The NEC NP630 is a 180W replacement lamp module that ships with a new Philips NSH bulb already mounted in its housing. It is designed for owners of compatible NEC projectors who need a direct, ready-to-install light source without separate bulb handling.
Replaces the original NP14LP assembly
This module takes the place of the factory lamp when brightness drops or the hour counter reaches its limit. The swap is worth it when the projector still meets the user's resolution and connectivity needs but the light output has faded below a usable level.
Fits into the projector's existing lamp bay
The self-contained housing slides into the same compartment as the original unit and connects to the same power interface. No extra cabling or mounting hardware is required, and the projector's built-in lamp timer can be reset after installation to track the new 4,000 to 5,000 hour rating.
Highlights
- Genuine Philips NSH 180W bulb delivers reliable brightness
- Lamp life reaches 4000 hours in normal mode
- Economy setting extends use to 5000 hours
- Fully assembled housing enables quick installation
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 180W |
| Lamp Life | 4,000 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
Will the NP14LP module fit the NP630 projector without extra brackets?
The NP14LP is a complete 180 W bulb-and-housing assembly built for the NP630, so it seats directly in the projector's lamp compartment with no additional mounting hardware.
What is the installation step users most often miss when fitting the NP14LP?
After sliding the module in, the retaining screw must be tightened and the lamp-hour counter reset through the projector menu; skipping the reset leaves the old hour total and disables economy-mode tracking.
When will the NP14LP need replacement under normal and economy settings?
Expect roughly 4 000 hours in normal mode or 5 000 hours in economy mode before brightness drops to half and a new NP14LP module is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



