We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular projector lamp module NP61 with integrated housing and 200W UHP bulb

NEC Display Solutions

NEC NP61 projector lamp 200W 2500 3500 hrs

SKU CH-9PQK-P2RWT

A 200W replacement lamp module with bulb and housing pre-assembled for quick installation, rated 2,500 hours normal and 3,500 hours economy mode

  • TypeProjector Lamp
  • Wattage200W
  • Lamp Life2,500 (Normal) - 3,500 (Economy) Hrs.
  • 200W UHP bulb delivers bright, consistent projection
  • 2,500 hours normal use extends replacement intervals
  • 3,500 hours economy mode reduces operating cost
  • ISO 9001 manufacturing ensures reliable ignition and run-time
  • Pre-assembled housing allows quick, tool-free installation

Genuine NEC NP61 replacement lamp

The NP61 module fits NEC projectors that require the NP09LP lamp assembly. It ships as a complete housing with a 200W UHP bulb already installed, so technicians can swap it without handling the bare lamp. The unit is manufactured to ISO 9001 quality standards using OEM-sourced components from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita. Buyers who need a bare bulb without the housing cannot use this module.

Thermal output and power draw

The lamp runs at a fixed 200W, delivering the brightness and heat profile the projector chassis was designed for. In normal mode the rated life reaches 2,500 hours, while economy mode extends it to 3,500 hours by reducing drive current and fan speed. Projectors that lack an economy mode or that operate in high-ambient temperatures will not achieve the longer figure. Installations requiring a different wattage or a liquid-cooled light engine are not supported.

Included housing and quality checks

The pre-assembled housing eliminates alignment steps and protects the bulb during insertion. Each unit undergoes beam-performance, ignition, voltage, appearance, connection and run-time testing before it leaves the factory. The package carries a 90-day warranty and a 30-day return window from the seller. Users who prefer to reuse their existing cage or who need a bare-bulb kit for a different projector series will find this module unsuitable.

Highlights

  • 200W UHP bulb delivers bright, consistent projection
  • 2,500 hours normal use extends replacement intervals
  • 3,500 hours economy mode reduces operating cost
  • ISO 9001 manufacturing ensures reliable ignition and run-time
  • Pre-assembled housing allows quick, tool-free installation

Specifications

BrandNEC
TypeProjector Lamp
Wattage200W
Lamp Life2,500 (Normal) - 3,500 (Economy) Hrs.

Questions about this item

How do I install the NP61 lamp module and what step is often missed?

The NP61 arrives as a fully assembled 200W bulb and housing. Power off the projector, let it cool, remove the old module, insert the new one until it clicks, then reset the lamp timer in the menu — skipping the timer reset is the step most people forget.

What maintenance or replacement will the NP61 need later?

The UHP 200W bulb is rated for 2,500 hours in normal mode or 3,500 hours in economy mode. When brightness drops or the projector warns you, replace the entire lamp module again; no separate filter or bulb-only change is required.

What limit appears first during sustained use of the NP61?

The 200W UHP bulb reaches its rated life first — 2,500 hours at normal brightness or 3,500 hours in economy mode — after which light output falls below usable levels and the module must be swapped.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.