We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEC Display Solutions

NEC NP600 OEM Replacement Projector Lamp 210W Ushio NSH

SKU CH-9R2W-T5P3W

A 210W replacement lamp module with a Ushio NSH bulb and housing, ready for installation and rated for 3,000 normal or 4,000 economy hours

  • TypeProjector Lamp
  • Wattage210W
  • Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
  • 210W Ushio NSH bulb delivers bright projection
  • 3,000 hours normal lamp life reduces replacement frequency
  • 4,000 hours economy mode extends operating time
  • Pre-assembled housing enables quick installation
  • ISO 9001 manufacturing ensures consistent quality

NEC NP600 OEM Replacement Projector Lamp 210W

This projector lamp module is a complete 210W bulb-and-housing assembly built for NEC NP600 projectors. It arrives fully assembled so the user can replace the old module without handling a bare bulb. The unit uses a Ushio NSH lamp rated for 3000 hours in normal mode and 4000 hours in economy mode. It suits owners of compatible NEC projectors who need a direct replacement.

Installation notes and common issues

The module slides into the projector lamp compartment and secures with the existing screws, requiring no special tools. Because the bulb is already seated in its housing, alignment errors are rare. The most frequent issue is forgetting to reset the projector's lamp-hour counter after fitting the new module, which can cause premature replacement warnings. Ensure the projector is completely cool and unplugged before starting the swap.

Pre-order compatibility checks

Verify that your projector model is the NEC NP600 or that the service manual lists part number NP07LP as the correct lamp module. Confirm the projector uses a 210W NSH lamp type, as other wattages will not fit or operate correctly. Check that the lamp compartment and connector layout match the housing shown in the product images. This module is not suitable for projectors requiring a different form factor or wattage.

Highlights

  • 210W Ushio NSH bulb delivers bright projection
  • 3,000 hours normal lamp life reduces replacement frequency
  • 4,000 hours economy mode extends operating time
  • Pre-assembled housing enables quick installation
  • ISO 9001 manufacturing ensures consistent quality

Specifications

BrandNEC
TypeProjector Lamp
Wattage210W
Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.

Questions about this item

How can I confirm the NP600 lamp is operating correctly after installation?

The projector should ignite without flicker, reach full brightness within a minute and the lamp-hour counter will begin counting from zero toward 3,000 hours in normal mode or 4,000 hours in economy mode

What components arrive with the NP600 replacement module and is anything else required?

The module ships as a fully assembled 210 W Ushio NSH bulb inside its housing, ready to install; no extra parts or tools are needed

Which NP600 lamp version should I choose among the OEM and compatible options?

Choose the OEM version from the original bulb maker for exact factory performance, the NEC-sold OEM for brand-matched assurance, an alternative OEM for equivalent specs, or the compatible version for a lower cost using genuine OEM parts

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.