NEC Display Solutions
NEC NP4100W-06FL Projector Lamp 280W
Genuine 280W P-VIP replacement lamp module with housing, rated 2,000 normal or 3,000 economy hours, ready for NEC projectors
- TypeProjector Lamp
- Wattage280W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready to install with bulb and housing assembled
- 280 watt P-VIP lamp powers bright projection
- Up to 3,000 hours life in economy mode
- Manufactured to ISO 9001 quality standards
- Genuine OEM bulb from leading manufacturers
What this lamp fits
The NEC NP4100W-06FL is a 280W P-VIP replacement module supplied as a complete bulb-and-housing assembly. It matches the original NP12LP specification for compatible NEC projectors. Installers receive a ready-to-fit unit that restores factory brightness without separate lamp alignment.
When to replace the old module
Swap the existing lamp once its runtime approaches 2,000 hours in normal mode or 3,000 hours in economy mode. The jump is worth it when image dimming, colour shift or frequent ignition failures appear. Keep the projector running on a fresh module instead of tolerating degraded output.
Installation and common pitfalls
The pre-assembled housing slides into the projector cage and locks with the existing screws; no bulb handling or reflector alignment is required. Allow the projector to cool fully before starting, and reset the lamp-hour counter in the menu after fitting. Forcing the connector or skipping the counter reset are the typical errors that cause a no-light fault.
Highlights
- Ready to install with bulb and housing assembled
- 280 watt P-VIP lamp powers bright projection
- Up to 3,000 hours life in economy mode
- Manufactured to ISO 9001 quality standards
- Genuine OEM bulb from leading manufacturers
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 280W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Does the NP4100W-06FL lamp module come with the housing already assembled?
Yes, the module includes a new 280 W P-VIP bulb pre-installed in its housing, so it fits the projector without extra assembly.
What is the correct procedure to reset the lamp-hour counter after installing this lamp?
After fitting the lamp, open the projector menu, select the lamp-reset option and hold the confirm button until the counter returns to zero; skipping this step leaves the old hour total active.
How many hours can I expect from the lamp in normal and economy modes?
The 280 W lamp is rated for 2,000 hours in normal mode and 3,000 hours in economy mode before replacement is recommended.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MADE IN USA TONER toner cartridge for KIP 7170 103 2 x 400 gm black
- Black
- Compatible



