NEC Display Solutions
NEC NP30LP Projector Lamp 270W 3500-8000 Hrs
A 270 W DLP replacement lamp module rated for 3,500 to 8,000 hours, supplied as a complete bulb-and-housing assembly for quick installation
- TypeProjector Lamp
- Wattage270W
- Lamp Life3,500 (Normal) - 8,000 (Economy) Hrs.
- Ready-to-install module with bulb and housing
- 270W Philips DLP bulb powers the lamp
- 3,500 hours normal mode lamp life
- Up to 8,000 hours in economy mode
- Manufactured to ISO 9001 quality standards
NEC NP30LP Projector Lamp 270W
The NEC NP30LP is a 270-watt replacement lamp module supplied as a fully assembled bulb and housing. It is designed for owners of compatible NEC projectors who need a direct, ready-to-install light source without separate handling of the bare bulb.
Capacity and headroom: 3500 to 8000 hours
In normal operation the lamp is rated for 3,500 hours, while economy mode extends the rating to 8,000 hours, giving venues and classrooms a wide window between replacements. Heavy daily use in normal mode will reach the limit sooner, so high-duty environments should plan for the shorter interval.
Build quality and daily implications
The module arrives pre-assembled, so installation consists of swapping the complete unit rather than aligning a bare bulb, reducing downtime and the risk of contamination. Manufacturing follows ISO 9001 checks covering beam performance, ignition, voltage, connections and run-time, supporting consistent output over the rated life.
Highlights
- Ready-to-install module with bulb and housing
- 270W Philips DLP bulb powers the lamp
- 3,500 hours normal mode lamp life
- Up to 8,000 hours in economy mode
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 270W |
| Lamp Life | 3,500 (Normal) - 8,000 (Economy) Hrs. |
Questions about this item
Will the 270W NP30LP lamp run in my older NEC projector that originally shipped with a lower-wattage module?
The lamp is built to the NP30LP specification at 270W; it fits the projectors designed for that part number. If your model requires a different wattage, the lamp will not be compatible.
How can I confirm the 270W bulb is performing correctly once installed?
Reset the projector’s lamp-hour counter, then monitor brightness and colour stability during the first few hours; the module is tested for ignition, voltage and run-time before shipping.
Does the NP30LP package include the housing, or do I need to buy a cage separately?
The module arrives as a fully assembled bulb and housing, so no extra cage or tools are required for installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



