We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular projector lamp module in black plastic housing with integrated connector and glass bulb visible

NEC

NEC NP26LP 350 W projector lamp 3000/4000 h

SKU CH-NE5Y-HKP17

Replacement lamp for compatible NEC LCD projectors, rated 350 W with 3000-hour normal and 4000-hour economy life

  • TypeOthers
  • 3000 hours normal use before replacement
  • 4000 hours economy mode extends intervals
  • 350 W lamp power matches original specs
  • LCD projector technology compatibility
  • Fits NP-PA622U NP-PA672W NP-PA722X series

Replacement lamp for NEC PA series projectors

The NEC NP26LP is a 350 W replacement lamp designed for compatible NEC LCD projectors. It restores original brightness when the installed lamp reaches end of life. Buyers include IT managers maintaining meeting-room fleets and home-cinema owners with supported models.

Replaces an ageing 350 W lamp in the same chassis

The unit matches the factory lamp power of 350 W and delivers 3000 hours in normal mode or 4000 hours in economy mode. The jump is worth it when image dimming or a lamp-warning message appears on a listed projector. It is not for users whose projector requires a different wattage or lamp housing.

Verify the exact projector model before ordering

Compatibility is limited to the NP-PA622U, NP-PA672W, NP-PA672W-13ZL, NP-PA722X and NP-PA722X-13ZL models. Check the label on your projector or the current lamp module to confirm the model number matches this list. The lamp will not fit other NEC series or third-party projectors.

Highlights

  • 3000 hours normal use before replacement
  • 4000 hours economy mode extends intervals
  • 350 W lamp power matches original specs
  • LCD projector technology compatibility
  • Fits NP-PA622U NP-PA672W NP-PA722X series

Specifications

TypeOthers

Questions about this item

Which NEC projector models accept the NP26LP lamp?

The NP26LP fits the NP-PA622U, NP-PA672W, NP-PA672W-13ZL, NP-PA722X and NP-PA722X-13ZL LCD projectors.

What is the correct way to install the NP26LP lamp module?

Power off and cool the projector, remove the lamp cover, release the securing screws, pull the old module straight out, insert the new NP26LP until it seats firmly, re-tighten the screws and replace the cover before resetting the lamp timer in the menu.

When should the NP26LP lamp be replaced?

Replace the lamp after approximately 3000 hours in normal mode or 4000 hours in economy mode, or sooner if brightness drops noticeably or the projector signals end of life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.