NEC Display Solutions
NEC NP1250 projector lamp 330W Philips NSH 330W bulb housing
Replacement projector lamp module with a 330 W Philips NSH bulb and housing, rated for 2,000 to 3,000 hours
- TypeProjector Lamp
- Wattage330W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with Philips NSH 330W bulb
- Bright 330W output for clear projection
- Up to 2000 hours normal lamp life
- Extended 3000 hours in economy mode
- Manufactured to ISO 9001 quality standards
330 W replacement lamp for NEC NP1250
This 330 W projector lamp module fits the NEC NP1250 and ships as a complete bulb-and-housing assembly. It arrives new and ready for immediate installation without extra tools. The unit is built to ISO 9001 quality standards using a Philips NSH bulb. It serves venues that need a direct OEM-spec replacement.
2 000 to 3 000 hour rated life
In normal mode the lamp is rated for 2 000 hours; switching to economy mode extends the rating to 3 000 hours. Brightness will gradually decline as those limits approach. Heavy daily use in normal mode will require replacement sooner than occasional economy-mode sessions. The module is not designed for user-serviceable bulb swaps.
Pre-assembled housing and Philips NSH bulb
The bundled housing eliminates alignment steps and reduces installation time to a single module swap. A genuine Philips NSH 330 W bulb is factory-fitted, so ignition voltage and beam performance match the original specification. No separate software, cables or mounting brackets are included.
Highlights
- Ready-to-install module with Philips NSH 330W bulb
- Bright 330W output for clear projection
- Up to 2000 hours normal lamp life
- Extended 3000 hours in economy mode
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 330W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Will the 330W NSH lamp work with the power supply in my NP1250 projector?
Yes, the lamp is a 330W NSH module built to the NP1250 specification, so it draws the same power as the original lamp.
How can I confirm the 330W NSH lamp is running correctly after I install it?
Reset the lamp timer in the projector menu; the counter should start at zero and the image should reach full brightness without flicker.
Does the NP1250 lamp module include the housing and bulb, or do I need to buy a separate cage?
The module arrives as a complete assembly with the Philips NSH 330W bulb already mounted in the housing, so no extra parts are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


