NEC Display Solutions
NEC NP-VE303 OEM Replacement Projector Lamp 190W
A 190 W replacement lamp module with a new Osram P-VIP bulb and housing, ready to install and rated for 5,000 hours normal or 6,000 hours economy use
- TypeProjector Lamp
- Wattage190W
- Lamp Life5,000 Hrs. (Normal) - 6,000 Hrs. (Economy)
- Ready to install with pre-assembled bulb and housing
- 190W Osram P-VIP lamp delivers bright projection
- 5,000 hours normal mode extends replacement intervals
- 6,000 hours economy mode reduces operating cost
- ISO 9001 manufacturing ensures consistent quality
Direct OEM Replacement
The NEC NP-VE303 is a new 190W projector lamp module supplied with a fully assembled Osram P-VIP bulb and housing. It fits the original equipment slot without modification and is intended for owners of compatible NEC projectors who need a like-for-like replacement.
ISO9001 Manufacturing
Each unit is built to ISO9001 standards and tested for beam performance, ignition, voltage, appearance, connections and run-time. The pre-assembled housing means the lamp installs in one step, reducing downtime and eliminating the need to handle a bare bulb.
Extended Economy Mode
The lamp delivers 5000 hours in normal mode and 6000 hours in economy mode, offering a measurable increase over standard-life modules. The jump is worth it for classrooms, meeting rooms or home cinemas that run the projector daily and want fewer replacements over the projector's life.
Highlights
- Ready to install with pre-assembled bulb and housing
- 190W Osram P-VIP lamp delivers bright projection
- 5,000 hours normal mode extends replacement intervals
- 6,000 hours economy mode reduces operating cost
- ISO 9001 manufacturing ensures consistent quality
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 190W |
| Lamp Life | 5,000 Hrs. (Normal) - 6,000 Hrs. (Economy) |
Questions about this item
What is the wattage of the Osram P-VIP bulb inside the NP-VE303 lamp module?
The module contains a 190W Osram P-VIP bulb, matching the original projector specification.
Does the NP-VE303 arrive as a complete housing assembly or as a bare bulb?
It ships as a fully assembled bulb and housing, ready to slot into the projector without extra assembly.
What is the correct order for removing the old module and inserting the new NP-VE303?
Power off and cool the projector, remove the lamp cover, unscrew the old module, pull it straight out, insert the new module until it seats, tighten screws, replace cover, then reset the lamp timer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



