NEC Display Solutions
NEC NP-U321H projector lamp 260W 3000 hrs
A complete 260 W UHP lamp module rated for 3,000 hours, supplied with housing for direct installation
- TypeUHP
- Wattage260W
- Lamp Life3,000 hrs
- Genuine Philips UHP bulb ensures reliable ignition
- 260 W power rating matches original projector spec
- 3,000-hour rated life reduces replacement frequency
- Pre-assembled housing enables quick tool-free installation
- Manufactured to ISO 9001 quality standards
Direct replacement module
The NP-U321H lamp module delivers a pre-assembled UHP bulb and housing rated at 260W and 3000 hours. It matches the original NEC NP34LP specification so installation requires no extra tools or alignment steps. Buyers who need a different wattage or a bare bulb without housing should look elsewhere.
Swaps the factory lamp without changes
This unit replaces the projector's original lamp assembly directly, restoring rated brightness and colour balance. The jump is worth it when the existing module reaches its 3000-hour limit or shows dimming, flicker or ignition failure. It does not upgrade the projector's native resolution or light-engine design.
Steady output through the rated cycle
Under continuous operation the 260W UHP bulb maintains stable voltage and beam performance for the full 3000-hour life. Each module is tested to ISO 9001 standards for ignition, run-time and connection integrity before shipping. Extended sessions beyond the rated hours are not supported by this lamp.
Highlights
- Genuine Philips UHP bulb ensures reliable ignition
- 260 W power rating matches original projector spec
- 3,000-hour rated life reduces replacement frequency
- Pre-assembled housing enables quick tool-free installation
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | NEC |
|---|---|
| Type | UHP |
| Wattage | 260W |
| Lamp Life | 3,000 hrs |
Questions about this item
What projector models accept the NP34LP lamp module?
The NP34LP module fits NEC projectors that specify the NP-U321H lamp; verify your projector's service manual for the exact model match.
Which step is most often missed when installing the pre-assembled housing?
After sliding the housing in, the retaining screw must be tightened fully and the lamp-hour counter reset in the projector menu; skipping the reset triggers premature replacement warnings.
When should the 260 W UHP bulb be replaced?
Plan replacement around 3,000 hours of use or when brightness drops noticeably; the projector's lamp timer tracks the elapsed hours.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



