NEC Display Solutions
NEC NP-PA853W-41ZL 370W projector lamp
A 370 W replacement lamp module with a Philips bulb and housing delivers 4,000 hours normal or 5,000 hours economy life for NEC projectors
- TypeProjector Lamp
- Wattage370W
- Lamp Life4,000 (Normal) Hrs. - 5,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- 370 W AC lamp powers compatible NEC projectors
- 4 000 hours normal mode lamp life
- 5 000 hours economy mode extends usage
- Manufactured to ISO 9001 quality standards
Ready-to-install 370W lamp module
The NEC NP-PA853W-41ZL is a complete replacement lamp assembly that ships with a new Philips 370W bulb already seated in its housing. It is built for technicians and AV managers who need a direct swap without handling bare lamps or aligning reflectors.
Rated 4000 hours normal and 5000 hours economy
At the standard setting the lamp delivers approximately 4000 hours of operation before replacement is due, while the economy mode extends that figure to roughly 5000 hours. Heavy daily use in bright rooms will reach the limit sooner than occasional presentations in dimmed spaces.
Fits NEC projectors using the NP42LP designation
The module matches the NP42LP form factor so it seats in the existing lamp cage without adapters or firmware updates. It does not suit projectors that require a different wattage or a non-AC ignition scheme, and it cannot be used in housings designed for lower-power lamps.
Highlights
- Ready to install with pre-assembled bulb and housing
- 370 W AC lamp powers compatible NEC projectors
- 4 000 hours normal mode lamp life
- 5 000 hours economy mode extends usage
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 370W |
| Lamp Life | 4,000 (Normal) Hrs. - 5,000 (Economy) Hrs. |
Questions about this item
Will the NP-PA853W-41ZL lamp module fit my NEC NP42LP projector without extra wiring?
The NP-PA853W-41ZL is a fully assembled bulb-and-housing module built for the NEC NP42LP, so it installs directly into the existing lamp cage without additional cables or adapters.
How can I verify the 370 W Philips AC bulb is igniting correctly after installation?
Power on the projector and confirm the lamp indicator shows steady green; the image should reach full brightness within the normal warm-up period and the on-screen timer will begin counting hours from zero.
Does the package include a replacement air filter or only the lamp module itself?
The box contains the complete NP-PA853W-41ZL lamp module with the 370 W Philips AC bulb pre-mounted in its housing; no air filter or other consumables are included and must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



