NEC Display Solutions
NEC NP-PA803U OEM Replacement Projector Lamp 370W
370 W replacement lamp module with a new Philips AC bulb and housing delivers 4,000 normal or 5,000 economy hours
- TypeProjector Lamp
- Wattage370W
- Lamp Life4,000 (Normal) Hrs. - 5,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- Bright 370W Philips AC lamp for clear projection
- Up to 4,000 hours normal or 5,000 hours economy use
- Built to ISO 9001 quality standards for reliable performance
- Genuine OEM replacement module matches original projector specs
Ready-to-fit replacement lamp
The NEC NP-PA803U module ships as a complete 370 W bulb inside its housing, so you can swap it into a compatible NEC projector without handling bare glass. It is built for venues that need a quick, tool-free service swap and reliable ignition every time.
ISO 9001 assembly and AC ignition
Each unit is assembled to ISO 9001 quality checks covering beam performance, voltage stability and run-time, and uses an AC lamp design that strikes consistently across the 4,000-hour normal or 5,000-hour economy ratings. The pre-fitted housing protects the bulb during transport and keeps alignment precise on reinstallation.
Verify NP42LP cross-reference before ordering
Confirm your projector lists the NP42LP part number so the connector and form factor match; this lamp will not fit models that call for a different module code. Buyers who need a bare bulb without housing or a lower-wattage alternative should look elsewhere.
Highlights
- Ready to install with pre-assembled bulb and housing
- Bright 370W Philips AC lamp for clear projection
- Up to 4,000 hours normal or 5,000 hours economy use
- Built to ISO 9001 quality standards for reliable performance
- Genuine OEM replacement module matches original projector specs
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 370W |
| Lamp Life | 4,000 (Normal) Hrs. - 5,000 (Economy) Hrs. |
Questions about this item
What wattage bulb does the NP-PA803U module contain?
The module contains a 370W AC Philips bulb that is pre-assembled in the housing.
Which NEC projector models accept the NP-PA803U lamp module?
The NP-PA803U is the direct replacement for NEC projectors using part number NP42LP.
How is the lamp module installed and what step is often missed?
Remove the old module, insert the new NP-PA803U, secure the retaining screws, then reset the lamp-hour counter in the projector menu so the 4,000-hour normal or 5,000-hour economy rating tracks correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



