NEC Display Solutions
NEC NP-M350X projector lamp NP16LP 230W 4000 hrs
A 230 W replacement lamp module with a 4,000-hour rated life for NEC projectors
- TypeProjector Lamp
- Wattage230W
- Lamp Life4,000 Hrs.
- Ready-to-install lamp module saves setup time
- 230 watt Ushio NSHA bulb matches original brightness
- 4,000 hour rated life reduces replacement frequency
- Manufactured to ISO 9001 quality standards for reliability
- Compatible with NEC NP-M350X projector model
Direct replacement for NP-M350X projectors
This 230W lamp module carries the NP16LP designation and arrives fully assembled with housing for immediate installation. It is intended for owners of the NP-M350X projector who need a genuine OEM replacement bulb. The unit uses a Ushio NSHA lamp built to ISO9001 quality standards. Buyers who need a different wattage or a lamp for another projector model should look elsewhere.
Typical thermals and power draw
In normal operation the lamp runs at its rated 230W, delivering the brightness and colour performance the projector was designed for. The module meets the manufacturer’s ignition, voltage and beam-performance checks before it leaves the factory. No additional cooling or power-supply changes are required beyond the projector’s standard specification.
Behaviour under sustained use
The lamp is rated for 4,000 hours of service life under typical operating conditions. Extended sessions will see stable output as long as the projector’s own thermal management functions correctly. Each unit undergoes run-time and connection testing to confirm reliable ignition and consistent performance throughout its rated lifespan.
Highlights
- Ready-to-install lamp module saves setup time
- 230 watt Ushio NSHA bulb matches original brightness
- 4,000 hour rated life reduces replacement frequency
- Manufactured to ISO 9001 quality standards for reliability
- Compatible with NEC NP-M350X projector model
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 230W |
| Lamp Life | 4,000 Hrs. |
Questions about this item
How do I install the NP16LP lamp module in my NEC projector, and what step is often missed?
The module arrives as a fully assembled bulb and housing; power off and unplug the projector, open the lamp cover, remove the old module, insert the new one until it seats firmly, then reset the lamp-hour counter in the menu — skipping the counter reset is the step most people forget.
What maintenance or replacement will the Ushio NSHA 230W bulb need after installation?
The lamp is rated for 4000 hours of operation; once that limit is reached the bulb must be replaced with a new NP16LP module, as the housing is not designed for separate bulb servicing.
What limit appears first when the projector runs continuously at full brightness?
The 4000-hour rated lamp life is the primary limit; sustained use at full power will reach this threshold before any other component constraint becomes relevant.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



