We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New NEC LT84G projector lamp module with 120W Osram P-VIP bulb in housing

NEC Display Solutions

NEC LT84G OEM Replacement Projector Lamp 120W P-VIP 1000 Hrs

SKU CH-6KQS-WCMTW

Replacement projector lamp module with 120W P-VIP bulb and housing, rated for 1,000 hours

  • TypeP-VIP
  • Wattage120W
  • Lamp Life1,000 Hrs.
  • OEM replacement module installs in minutes
  • 120 W P-VIP lamp matches original brightness
  • 1,000-hour rated life reduces replacement frequency
  • ISO 9001 quality checks verify beam and ignition
  • Compatible with NEC LT84G and LT40LP projectors

Ready-to-install projector lamp

The NEC LT84G replacement module ships as a complete 120W P-VIP bulb inside its housing, so no separate assembly is required before fitting it into the projector. Installation follows the standard lamp-door procedure for the compatible NEC models. The unit is manufactured to ISO9001 quality checks covering beam performance, ignition, voltage, connections and run-time. Handle the bulb only by the housing to avoid contaminating the quartz envelope.

Compatible NEC projectors only

This lamp is built for projectors that accept the LT84G or LT40LP part numbers; it will not fit other brands or NEC series that use a different lamp code. Verify the exact model number on your existing lamp or in the projector’s service menu before ordering. The rated life is 1,000 hours under normal operating conditions. Buyers needing a different wattage, connector layout or longer rated life should look for the lamp specified for their particular projector model.

Check lamp code and hour counter

Confirm that your projector lists LT84G or LT40LP as the approved replacement code. After installation, reset the lamp-hour counter through the projector menu so the replacement timer starts from zero. Ensure the projector’s air filters are clean and ventilation space is adequate, as restricted airflow can shorten the 1,000-hour rating. The module is supplied new with a 180-day warranty from the supplier.

Highlights

  • OEM replacement module installs in minutes
  • 120 W P-VIP lamp matches original brightness
  • 1,000-hour rated life reduces replacement frequency
  • ISO 9001 quality checks verify beam and ignition
  • Compatible with NEC LT84G and LT40LP projectors

Specifications

BrandNEC
TypeP-VIP
Wattage120W
Lamp Life1,000 Hrs.

Questions about this item

How can I confirm the LT84G lamp is performing correctly after installation?

Check the projector menu for a lamp hour counter reset to zero and verify the image reaches full brightness without flickering during the first 30 minutes of operation

What components are included with the LT84G lamp and what must I source separately?

The module arrives as a fully assembled 120 W P-VIP bulb inside its housing; no extra parts are required for installation in a compatible NEC projector

Which LT84G version should I choose among the OEM and compatible options?

Select the OEM version from the original bulb manufacturer for exact factory specifications, the NEC-sold OEM for brand-matched supply, an alternative OEM for equivalent 1 000-hour rated performance, or the compatible version for a lower-cost genuine-parts alternative

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.